Can You Unlock Apple iPhone 6s After Forgetting the Passcode?

If you forget the passcode on your Apple iPhone 6s, you won’t have the option to access its information and use it flawlessly. What’s more disturbing is that if you keep entering the wrong ones, your Apple iPhone 6s will be locked. It would help if you opened it, be it a 4-digit passcode, 6-digit passcode, Fingerprint, or Face ID.

If you forgot passcode on iPhone, the main thing you can do with your iDevice is to make an Emergency call. You should erase your Apple iPhone 6s if you don’t remember your screen unlock code. But don’t worry; we have many solutions available here. Keep reading to learn about the best tool, i.e., Dr.Fone, for screen unlock.

Part 1: Can I Unlock My iPhone When I Forgot Passcode?

Yes, you can unlock your locked iPhone without a passcode. If you forgot passcode on iPhone, Apple’s proper prescribed way is to reset your Apple iPhone 6s. In other words, do a factory reset to erase the passcode. However, many individuals can’t do this strategy since it’s irksome and may lead to a few unforeseen issues. Such issues can worsen the condition.

Therefore, we have introduced some alternate ways to unlock your iDevice. You can even use an expert tool to remove this issue. Keep following us to find out more about our recommended methods.

1. Use Find My

Utilizing iCloud if the Find My feature is enabled before you forgot iPhone passcode. By visiting iCloud.com, you can erase your Apple iPhone 6s from a distance. Moreover, you can eliminate the Apple iPhone 6s device’s screen lock to unlock it.

To erase the passcode using the Find My feature on iCloud:

Step 1. Go to iCloud.com and enter your Apple account credentials and log in to your account.

Step 2. Pick “Find iPhone” and go to “All Devices” > “Erase iPhone”.

2. Use Recovery Mode with iTunes

How to bypass the Apple iPhone 6s passcode or eliminate the passcode? The method is to utilize iTunes. However, using iTunes to restore the Apple iPhone 6s in recovery mode will erase all data from the Apple iPhone 6s device.

It will wipe out the iDevice. Therefore, you must back up your data to restore it later. Without any backup accessible, you will permanently lose everything on the iDevice.

Additionally, ensure you remember the Mac ID credentials on the iDevice, or you won’t be able to use it. Finally, utilizing iTunes will eliminate the lock screen’s passcode but not the firmware. Considering all these, bypassing a passcode isn’t so hard. Here’s how to bypass the Apple iPhone 6s passcode with iTunes:

Step 1. Enter the recovery mode on your Apple iPhone 6s, iPad, or iPod Contact.

• On iPhone 8/8 Or later: Hold the Power/Side button on your phone and one of the volume buttons. Keep holding until the power off slider shows up. Flip the slider to switch off the iPhone. Next, press and hold the power button and connect your Apple iPhone 6s to the PC. Hold the button until the Apple iPhone 6s transforms into the recovery mode screen.
• On iPhone 7/7 Or Below: Press and hold the power button until you see the slider. Flip the slider to switch off the iPhone. Press the Volume Down button and connect the Apple iPhone 6s to the PC. Continue to hold the button until you see the recovery mode screen.

Step 2. Restore your Apple iPhone 6s.

After connecting your Apple iPhone 6s to the PC, you will see a popup window in iTunes saying, “There is an issue with the ‘iPhone name’ that needs it to be restored.” In that window, select “Restore” to erase the iPhone. (If iTunes doesn’t run, open iTunes by double tapping it.)

Step 3. Set up iPhone.

Hang tight for the process to wrap up. Then, a short time later, go to your Apple iPhone 6s and follow the on-screen directions to set up and utilize your phone again.

3. “Erase iPhone” Option

However long the locked iPhone has a functioning WiFi connection, you can now delete the Apple iPhone 6s device from the lock screen. This method only works if it is running iOS 15.2 or above.

After several wrong attempts, an “Erase iPhone” choice will appear on the screen’s lower part. Just tap on that, confirm you need to erase the Apple iPhone 6s and enter your Apple ID details afterward. The device will then reset itself, completely deleting all data and beginning as a new one.

If the Apple iPhone 6s device can’t connect to WiFi or data, the Apple ID approval step will fail. Then the Apple iPhone 6s cannot be erased, and you will need to turn to the conventional DFU strategy.

4. Use Siri

You can also use Siri to bypass the Apple iPhone 6s passcode. Using Siri to erase the lock is an iPhone hack existing on iOS devices running iOS 8.0 to iOS 10.1. You can utilize Siri to bypass your Apple iPhone 6s passcode by switching off cellular data. You also need to read a new message and set a reminder, and that’s just the beginning.

That is an indirect method for bypassing a forgotten passcode on iPhone. In any case, it is just available on a few iOS variants.

To erase the lock screen passcode with Siri on iOS 8 to iOS 10.1:

Step 1. Press and hold the “Home” button to actuate Siri on your Apple iPhone 6s.

Step 2. Advise Siri to set a reminder.

Step 3. Tap the recently added reminder to open the “Reminders” application.

Step 4. Click the “Home” button and go to the Home screen. Presently you have effectively bypassed the lock screen.

As you might be aware, this way is helpful because of iOS bugs. This method is also viewed as a method for hacking the iPhone. In later iOS versions, Apple fixed these bugs. In this manner, it works on iPhones running iOS 8.0 to 10.1.

5. Dr.Fone-Screen Unlock

The Apple iPhone 6s unlock software Dr.Fone-Screen Unlock will help to open the password without iTunes. It is well-versed in unlocking screen locks from various iOS devices, including the iPhone, iPad, and iPod contact. With it introduced on your PC, you can eliminate your Apple iPhone 6s lock screen effectively. It can remove the 4-digit password, 6-digit password, Fingerprint, or Face ID.

Therefore, Dr.Fone is a decent option if you like to sidestep the passcode on your Apple iPhone 6s without Siri or iTunes. To fix more issues, such as bypassing the enactment lock without the past proprietor, Dr.Fone-Screen Unlock will be a decent option for you. The following steps illustrate how you can unlock your lock screen passcode:

Step 1. Connect your Apple iPhone 6s/iPad

Open the Dr.Fone program on your PC and select “Screen Unlock” among all the options from the home page.

Connect your iOS device to the PC through a USB connector. Then, at that point, click the “Unlock iOS Screen” option on the screen.

Step 2. Boot iPhone in Recovery or DFU mode

Before sidestepping the Apple iPhone 6s lock screen, we want to boot it in Recovery or DFU mode by adhering to the on-screen directions. Therefore, the Recovery mode is suggested for the iOS lock screen. Yet, if you can’t actuate the Recovery mode, you can also use the DFU mode.

Step 3. Affirm iOS device information

After putting the Apple iPhone 6s device in DFU mode, Dr.Fone will show the Apple iPhone 6s device information, for example, the Apple iPhone 6s device Model and OS Variant. You can choose the correct data from the dropdown menu if the information is incorrect. Then, at that point, click Download to download the firmware for your device.

Step 4. Unlock the Apple iPhone 6s screen lock

After the firmware is downloaded effectively, click Unlock Now to begin unlocking your Apple iPhone 6s/iPad.

Simply shortly, your Apple iPhone 6s will be unlocked effectively. Note that this unlocking process will wipe the user data on your Apple iPhone 6s. However, it is practical to erase this issue from your device.

Part 3: How Can I Turn Off/On My Passcode?

• Open your Settings application and look down until you track down the choice for the password menu. On iPhones with a home button, this will be named “Fingerprint and Password.” On new ones, it is “Face ID and Password.” Click this choice.
• Enter your current password.
• Look down until you track the “Turn Passcode Off” choice and tap it.

• Click again to agree with your decision to turn off your passcode.

The Bottom Line

Indeed, if you forgot the passcode on the iPhone, there are a few ways to get into your phone again. However, the best way is to use professional software to do the task for you. Therefore, we strongly suggest you install the Wondershare Dr.Fone-Screen Unlock software. It is a security tool and worth trying when you forgot iPhone passcode. So download it today for a quick unlocking experience.

How to Unlock Apple iPhone 6s without Passcode or Face ID

You can’t access your Apple iPhone 6s because the Face ID isn’t working, and you forgot your passcode? So you are considering how to unlock iPhone without face ID or passcode. If so, this article will walk you through how to do that.

Firstly, one ought to realize that it is impossible to hack an iPhone passcode. Therefore, the primary way that attempts to unlock your device without a PIN or Face ID is to erase it. After reading this guide, you will figure out how to unlock iPhone without passcode or face ID. Keep reading to find out more and learn about the best tools in the business.

Part 1: Best Ways to Unlock iPhone without a Passcode or Face ID

1. Unlock it via Find My

• Go to the iCloud official site, and sign in to your iCloud account. The site will give you two or three choices when you log in. Click on “Find iPhone” to proceed.
• You will be taken to another interface. Click “All devices” and select the Apple iPhone 6s on which you need to erase the passcode.
• Click on “Erase iPhone”, and afterwards affirm the decision. That’s the simplest solution for how to unlock iPhone without passcode or face ID.

2. Via iTunes

Step 1. Go to Recovery Mode

Entering the recovery mode requires various steps, given your Apple iPhone 6s model or settings. Assuming you’re uncertain which one you have, check the rear of your phone or the client manual you got in the first box.

iPhone 8 and Above:

• Hold the Side button used to lock your screen and both Volume buttons. The power-off slider will show up on the screen.
• Drag the slider to one side to switch off your Apple iPhone 6s.
• Use a lightning connector to plug your Apple iPhone 6s into a Macintosh or PC while holding the Side button.
• Keep holding the button until the recovery screen shows up.

iPhone 7/7 Plus:

• Hold the Side button used to lock your screen until the power-off slider shows up.
• Switch off your Apple iPhone 6s.
• Connect your Apple iPhone 6s to a Macintosh or PC through a connector while holding the Volume (-) button.
• Continue to press the button until you get to recovery mode.

iPhone 6 or Below:

• Hold the Side or Top button and trust that the power-off slider will appear.
• Switch off your Apple iPhone 6s.
• Connect your Apple iPhone 6s to a system through a connector while holding the Home button.
• Keep the Home button held until you see the recovery screen.

Step 2. Select your Device on your System

After entering recovery mode, you’ll have to continue on your Macintosh or PC. Then, contingent upon your OS, follow the aide underneath to begin unlocking your Apple iPhone 6s.

macOS Catalina

• Go to the Finder window.
• Your Apple iPhone 6s will appear on the left half of the Finder window under Locations. You can tap on it to choose it.

macOS Mojave or a Windows with iTunes

If your gadget isn’t running macOS Catalina or later, you’ll need to involve iTunes to connect your Apple iPhone 6s. In the first place, download iTunes on your PC. Then, take the appropriate steps depending on which iTunes version you’re running:

• On iTunes 12 and newer, click on the Apple iPhone 6s symbol in the upper-left corner of the iTunes window.
• On iTunes 11, click on the Apple iPhone 6s tab on the right half of the iTunes window.
• On iTunes 10, the Apple iPhone 6s will be in the sidebar on the left.

Step 3. Pick the Choice to Restore

When you’ve effectively connected and chosen your Apple iPhone 6s on a Mac or a PC, tap on the Restore button. And that’s how to unlock iPhone without passcode or face ID.

3. DNS Server

The following steps explain how to unlock iPhone without face ID or passcode using a DNS server:

Step 1. Pick your LANGUAGE and COUNTRY from the lock screen menu after switching on a locked device.

Step 2. Click “Continue” to enter the WiFi settings page. Whenever requested to connect to WiFi, search for the “I” next to the WiFi tab.

Step 3. Disconnect your current network, go to “Network/connection Settings”, and click Forget.

Step 4. Click the “I” and enter a DNS server IP address to bypass the lock. IP addresses of different regions are given below:

• USA: 104.154.51.7
• South America: 35.199.88.219
• Europe: 104.155.28.90
• Asia: 104.155.220.58
• Australia and Oceania: 35.189.47.23
• Others: 78.100.17.60

Step 5. Then, click the “Back” choice at the left half of your screen, turn the WiFi on and select your network. Enter your WiFi passcode.

Step 6. Click Next Page > Back to enter the lock bypass screen. These are all the required steps for how to unlock iPhone without passcode or face ID 2022.

4. Dr.Fone-Screen Unlock

This section will introduce you to our most important solution. Yes, you heard it right. If you need a hassle-free method to unlock your iDevice without a passcode or face ID, use Wondershare Dr.Fone Screen Unlock.

Dr.Fone will not only remove the screen lock but also make sure to keep your identity safe. In addition, it is the easiest method and requires no prior knowledge. So if you are someone new to this technology, we suggest you follow the steps below:

Step 1. Launch the Software on your PC

After successfully installing Dr.Fone on your PC, open it and select the “Screen Unlock” tool from the main interface.

Next, connect your locked phone to the system through a wired connection. Then go for the iOS screen unlock feature.

Step 2. Recovery or DFU Mode Boot

It is necessary to first boot your locked device in recovery or DFU mode. Follow the guidelines on your screen to do so. The Recovery mode is the suggested way for iOS screen locks. If you can’t actuate this mode, go for the DFU mode boot.

Step 3. Select your Apple iPhone 6s Model

After the phone is in recovery/DFU mode, the program will show the locked device’s information. Here you can see the model and iOS variant of the Apple iPhone 6s device. If it isn’t correct, you could choose the right one from the dropdown menu next to it. After that, click the Download button to get the required firmware for your locked phone.

Step 4. Remove the Screen Lock

After downloading the firmware effectively, click the “Unlock Now” button to let Dr.Fone unlock your Apple iPhone 6s.

Simply in no time, Dr.Fone will successfully unlock your device.

Note: This unlocking process will erase everything off your Apple iPhone 6s and bring it to the factory default state. Indeed, no other method that doesn’t allow data erasure at the moment.

Part 2: How to Turn Off Passcode or Face ID on My Device?

Face ID can be a helpful method for unlocking your Apple iPhone 6s - by simply looking at your phone. However, a few clients might worry that it’s not as secure as utilizing a PIN to open your phone. If that is the best case for you, you can follow this manual to disable Face ID and depend on a passcode.

Here’s the step-by-step guide to the most effective method to switch off Face ID on the iPhone:

1. Open the Settings application

First, tap on your Settings app to open it. That is the one on the home screen with a symbol like the mechanical gear.

2. Tap on Face ID and Passcode

On the Settings menu, tap on the Face ID and Passcode menu.

3. Enter your passcode

At this stage, you’ll be approached to enter your passcode, so do this to get to the Face ID and Passcode menu.

4. Switch off Face ID

You’ll have the option to turn off the switch for Face ID across different activities, including the phone unlock.

Part 3: Can I bypass my iPhone Face ID with a picture?

As indicated by Apple, the short and obvious answer is no.

FaceID isn’t simply a camera snapping a picture. It utilizes an exceptional chip to filter the face with many spots. It makes a 3D contour of the look that works in low, glorious light around evening time, and your eyes must be opened. The opportunity to randomly unlock an iPhone with FaceID is 1/1 million, compared to 1/50000 with Touch ID.

It doesn’t work by snapping a picture of your face, but by taking a contour of your face if you utilize a camera that can see infrared. However, a photograph is a level and cannot give a dab matrix required for Face ID to work. You may be holding a clear piece of paper before the phone.

The Bottom Line

That’s all about our take on how to unlock iPhone without passcode or face ID 2022. We have worked hard to make sure you get the right solutions in hand. However, we strongly suggest Dr.Fone if you still face issues with our solutions. Even if the above methods fail, Dr.Fone will ensure you unlock your phone.

Trouble with Apple iPhone 6s Swipe-Up? Try These 11 Solutions

Part 1: Why Is My iPhone Screen Not Swiping?

The iPhone’s swipe-up gesture serves as a fundamental navigation tool. It allows users to access various functions and features swiftly. Yet, when this functionality encounters issues, it can be perplexing and disruptive. That’s why learning the reasons behind I can’t swipe up on my iPhone is essential. Summarized below are some of the common reasons behind frozen swipe-up issues:

1. Software Glitches

Updates or software bugs can occasionally interfere with the swipe-up gesture. It leads to unresponsiveness or delays.

2. Touch Screen Calibration

Sometimes, the touch screen may need recalibration. This can cause the swipe-up feature to become unresponsive.

3. Physical Damage

Physical damage, like heavy falls, can impact the phone’s touch sensitivity. Moreover, it affects swipe gestures as a result.

4. Full Memory or Background Apps

Insufficient memory or many background apps running simultaneously can overload the Apple iPhone 6s device. This leads to performance issues, including unresponsive gestures.

5. Water Exposure

Sudden exposure to moisture or water damage can also cause the screen to malfunction. This can cause the screen to become unresponsive, leading to swipe-up issues.

Part 2: 11 Ways To Fix iPhone Swipe up Not Working

Encountering an unresponsive swipe-up gesture on your Apple iPhone 6s can be exasperating. However, you no longer need to worry. There are numerous troubleshooting techniques available to address this problem. Explained below are the 11 effective ways to address the problem:

Fix 1. Fix iOS System Error Without Data Loss: Dr.Fone – System Repair (iOS)

Wondershare Dr.Fone - System Repair (iOS) is a reliable solution designed to resolve iOS system issues. It also includes unresponsive gestures like the swipe-up problem on iPhones. This tool specializes in repairing iOS system errors without causing data loss. It offers a comprehensive solution for resolving iOS system issues conveniently from home. With this tool, you can address over 150 iOS system problems.

Dr.Fone - System Repair (iOS)

Repair iOS System Errors Without data loss.

• Only fix your iOS to normal, no data loss at all.
• Fix various iOS system issues stuck in recovery mode , white Apple logo , black screen , looping on start, etc.
• Downgrade iOS without iTunes at all.
• Works for all models of iPhone, iPad, and iPod touch.
• Fully compatible with the latest iOS version.

3981454 people have downloaded it

These include the Apple logo, boot loop, and the 1110 error, among others. It enables you to downgrade or update iOS versions without needing to jailbreak your device. Additionally, it allows you to enter or exit DFU and Recovery Mode at no cost.

Key Features of Wondershare Dr.Fone

1. This user-friendly iOS system repair solution doesn’t typically lead to data loss.
2. It doesn’t require users to have advanced technical skills to operate it.
3. Wondershare Dr.Fone is compatible with all iPhone, iPad, and iPod Touch models, regardless of the iOS version.

Steps to Fix iPhone Swipe up Not Working via Wondershare Dr.Fone

Here’s how to use Wondershare Dr.Fone to address the swipe-up not working on iPhone problem:

Step 1: Initiate System Repair with Dr.Fone

After successfully downloading Dr.Fone on your device, navigate towards the left side panel and click “Toolbox.” From the many options appearing on the main window, select “System Repair.” Then, establish a connection between your iOS and your current device.

Step 2: Opt for iOS Restoration and Enable Recovery Mode

Select the Apple iPhone 6s device type from the available options and select “iPhone.” From the new window, select “iOS Repair,” and following that, select “Standard Repair.” Now, follow the instructions available and enable recovery mode for your iOS.

Step 3: Select iOS Firmware to Initiate the Repair Process

After that, you’ll reach a window showing different iOS firmware alternatives. Pick any as per your preferences and click “Download.” Once the download is complete, click “Repair Now” and “Done” to end the repair process.

Fix 2. Force Restart iPhone

Performing a force restart, also known as a hard reset, can troubleshoot minor software glitches. These can cause unresponsive swipe-up issues on your Apple iPhone 6s. Here’s a guide on how to perform a force restart on various iDevice models to fix the iPhone won’t swipe up:

For iPhone 8 and Later Devices

Instructions: Begin by moving your finger towards the left side of your Apple iPhone 6s and tap on the “Volume Up.” Then, release the button after some points. Proceed similarly with the “Volume Down” button. Then, navigate towards the right side and press the “Side” button there. Keep on forcing the “Side” button up until the screen shows the Apple logo. This will indicate that a force restart is initiated.

For iPhone 7 Series

Instructions: Begin by reaching both sides of your Apple iPhone 6s at once. Press the “Volume Down” button situated on the left side using your left hand while simultaneously using your right hand to press the “Sleep/Wake” button on the right side. Stay firm with the grip on both buttons and release them when you see the signature Apple logo glowing on the screen. This will indicate that the force restart operation has been successful.

For iPhone 6 and Older Devices

Instructions: To restart your Apple iPhone 6s 6, press the “Wake/Sleep” button on the top edge of the phone. Hold the other “Home” button at the bottom center screen of the phone. Continue holding the buttons until the Apple logo becomes visible on the display. Then, press the “Wake/Sleep” button and the “Home” button.


Fix 3. Remove the Cover or Case

Sometimes, an unresponsive swipe-up gesture on your Apple iPhone 6s could be due to interference caused by a protective cover or case. The cover might be too thick, improperly aligned, or interfering with the touch sensitivity of the screen. Gently remove the protective cover or case from your Apple iPhone 6s. Inspect the screen for any dust, debris, or smudges while the cover is removed. Utilize a clean, soft cloth to wipe the screen.

Fix 4. Clean iPhone Screen or Remove Screen Protector

An unresponsive swipe-up gesture on your Apple iPhone 6s might be due to dirt, smudges, or interference caused by a screen protector. Power off your Apple iPhone 6s to prevent accidental taps during the cleaning process. Carefully clean the screen by softly rubbing it with a fresh and dry microfiber cloth. In addition, ensure the cloth is soft and free from any debris that might scratch the screen.

Fix 5. Activate Control Center Access on the Lock Screen

If your Apple iPhone 6s swipe-up gesture isn’t working specifically on the lock screen to access the Control Center, it might be due to settings restricting its accessibility. Enabling Control Center access on the lock screen allows you to swipe up from the bottom edge. Follow these steps to ensure Control Center access is enabled on the lock screen and fix the iPhone swipe up not working:

Step 1. On your iOS device, access the “Settings” app and launch it. Now scroll down to find and tap “Face ID & Passcode.”

Step 2. Head to the “Allow Access When Locked” section, toggle on the “Control Center” switch, then return to the lock screen to verify if the problem has been resolved.

Fix 6. Enable Control Center Within Apps

Are you experiencing issues with accessing the Control Center via the swipe-up gesture while using certain apps? If yes, ensuring that Control Center access is enabled within apps is essential. It ensures that the swipe-up gesture from the bottom edge of the screen functions. Here’s how to enable Control Center access within apps:

Instructions: Navigate to Settings on your Apple iPhone 6s and access “Control Center.” On the following screen, activate the toggle next to “Access Within Apps.” It will allow you to access the Control Center when using apps.

Fix 7. Update to the Latest iOS Version

Running an outdated iOS version can sometimes lead to various software issues. These include unresponsive gestures like the swipe-up function on your Apple iPhone 6s. Updating your device to the latest iOS version can often resolve such problems. Here’s how to check for and update your Apple iPhone 6s to the latest iOS version:

Step 1. Unlock your Apple iPhone 6s and open the “Settings” app to access “General” settings. Simply touch the “Software Update” option to verify if an update is accessible.

Step 2. If an update is available, press the “Update Now” button to commence the updating process. During the process, make sure to follow the prompts carefully to avoid issues.

Fix 8. Turn Off VoiceOver

VoiceOver is an accessibility feature on iPhones. It assists users with visual impairments by providing spoken feedback for actions on the Apple iPhone 6s device. Sometimes, VoiceOver settings can interfere with normal touchscreen gestures like the swipe-up function. Here’s how to turn off VoiceOver to resolve iPhone 13 won’t swipe up to unlock:

Step 1. You will need to open the Settings app and scroll down to select the “Accessibility” menu. There, tap “VoiceOver” to get access to the “VoiceOver” settings.

Step 2. On the following screen, toggle off the “VoiceOver” switch if it is enabled. Afterward, check if the swipe-up gesture issue is resolved.

Fix 9. Customize Touch Accommodations

Touch Accommodations is an accessibility feature on iPhones. It is designed to modify touch sensitivity and enhance touchscreen interactions for users. Customizing these settings might resolve issues with unresponsive gestures like the swipe-up function. Here’s how to customize Touch Accommodations to fix the Apple iPhone 6s 12 won’t swipe up to unlock:

Step 1. Move to the “Accessibility” settings of your Apple iPhone 6s and select “Touch.” On the following screen, scroll down and tap “Touch Accommodations.”

Step 2. Now, first, enable the “Touch Accommodation” option from the top of the next screen. Then, scroll down and set the “Tap Assistance” option to “Use Initial Touch Location.”

Fix 10. Turn Off Reduce Motion

Reduce Motion is an accessibility setting on iPhones designed to reduce animations and visual effects. It is particularly for users sensitive to motion effects. However, enabling this feature might affect certain gestures or animations on the Apple iPhone 6s device. Thus potentially causing issues with the swipe-up function. Here’s how to turn off Reduce Motion to fix the iPhone 11 won’t swipe up to unlock:

Step 1. Go through your iOS device Settings to open the “Accessibility” tab. Here, find and tap the “Motion” option to proceed.

Step 2. Now, on the following screen, turn off the toggle next to the “Reduce Motion” option. Then, go and check if the swipe-up gesture issue is fixed or not.

Fix 11. Reset iPhone All Settings

Resetting all settings on your Apple iPhone 6s can help resolve software-related issues. It can help remove conflicts that might be affecting the swipe-up gesture. Note that this action will reset all settings on your device, but it won’t delete your data. Here’s how to reset all settings to fix iPhone swipe not working:

Step 1. Go to your device’s “General” settings and scroll down to tap the second last option, “Transfer or Reset iPhone.” On the following screen, press “Reset” from the available two options.

Step 2. Now, choose “Reset All Settings” from the pop-up options and confirm it by providing the passcode. Then, wait for a few moments as your Apple iPhone 6s is restored to its original settings.

Part 3: Unlock iPhone Without Swiping Up

Encountering swipe not working on iPhone can sometimes lead to difficulties. This is especially the case in unlocking the Apple iPhone 6s device or accessing essential functions. In such scenarios, using Wondershare Dr.Fone - Screen Unlock (iOS) provides a reliable solution. It bypasses the swipe-up need and regains access to your Apple iPhone 6s without relying on the problematic gesture. This tool offers a solution to unlock iPhone/iPad devices without the passcode.

Dr.Fone - Screen Unlock (iOS)

Unlock iPhone/iPad Lock Screen Without Swiping Up.

• Simple, click-through, process.
• Unlock screen passwords from all iPhones and iPads.
• No tech knowledge is required, everybody can handle it.
• Supports iPhone 15 / iPhone 14 / iPhone 13 / 12, iPhone 11, … and the latest iOS version fully!

4,395,216 people have downloaded it

It allows the removal of various lock screens present on iPhone, iPad, and iPod touch. Additionally, it provides the capability to bypass the iCloud activation lock. Users can also bypass MDM and screen time restrictions without experiencing any data loss.

Key Features of Wondershare Dr.Fone

1. This software is compatible with the latest iOS 17 and iPadOS 17, including iPhone 15 models.
2. The unlocking process involves a simple 3-step procedure.
3. With it, you can remove Apple ID from your device without the password.

Steps To Unlock iPhone Without Swiping Up via Wondershare Dr.Fone

You can use the simple steps explained below to unlock your Apple iPhone 6s and fix the Apple iPhone 6s 11 swipe-up not working:

Step 1: Connect Your Device and Choose Unlock iOS Screen

Upon downloading and installing Wondershare Dr.Fone onto your computer, access the “Toolbox” menu. Here, proceed to select “Screen Unlock” followed by “iOS.” Within this window, choose the “Unlock iOS Screen” option to proceed with unlocking your iOS device’s screen. Subsequently, connect your Apple iPhone 6s and click Start to initiate the unlocking process.

Step 2: Ensure Your Device is in Recovery Mode

Now, adhere to the on-screen prompts provided to enter Recovery Mode based on the specific model of your iDevice. Then, the platform automatically recognizes and exhibits the Apple iPhone 6s device Model. If necessary, change the model and choose the system version as per your preferences. Upon completion, click on “Start” to continue the process.

Step 3: Unlock Your iOS Device Successfully

Once the iOS firmware has been successfully downloaded, it undergoes verification. Proceed by selecting the “Unlock Now” button to initiate the unlocking process. A prompt window will emerge on the screen, requesting confirmation of the process. Enter the code and tap “Unlock” to proceed to the final step. Upon successfully unlocking the iDevice, click the “Done” button to finish the process.

Conclusion

Having trouble with swipe up not working on an iPhone can be annoying. It stops you from using important stuff and moving around your phone quickly. This guide has lots of ways to fix it. We’ve covered simple things like restarting your Apple iPhone 6s and cleaning the screen, as well as more complex stuff like changing settings and using unique options for accessibility. These fixes can help make the swipe-up gesture work again.

We’ve also talked about a helpful tool called Wondershare Dr.Fone. It’s made to fix problems with the lock screen, including issues with swiping on your Apple iPhone 6s. Moreover, Dr.Fone - Screen Unlock lets you get into your Apple iPhone 6s even when gestures aren’t working properly.