How Many Attempts To Unlock Apple iPhone 13 Pro

Unlocking your Apple iPhone 13 Pro involves a delicate balance to avoid pitfalls. Knowing how many attempts to unlock an iPhone is vital due to Apple’s security measures. Exceeding the limit triggers consequences, such as temporary disablement or even data erasure.

These restrictions highlight the need to learn how many attempts for iPhone passcodes are allowed before facing potential data loss. When dealing with failed passcode attempts, exploring methods for successful access is essential. Let’s delve into the intricacies of iPhone passcode security and unveil strategies for a seamless unlocking process. Read on to learn more.

Part 1. How Many Times Until the Apple iPhone 13 Pro Is Permanently Disabled?

Unlocking an iPhone involves a series of attempts, each with distinct consequences. Here’s a breakdown of how many failed passcode attempts on an iPhone you can do before it locks you out:

First 5 Attempts

• No significant consequences.
• Users have the flexibility to enter their passcode without any penalties.

6th Attempt

• iPhone is disabled for 1 minute.
• An iPhone is Disabled message appears on the screen.

7th Attempt

• Disabled for 5 minutes.
• The same on-screen message persists, but the Apple iPhone 13 Pro enforces a longer wait time.

8th Attempt

• Disabled for 15 minutes.
• Users must wait before attempting again. The escalating time delay discourages brute-force attacks.

9th Attempt

• Disabled for 60 minutes.
• A considerable waiting period is imposed. It increases the frustration for unauthorized users attempting to gain access.

10th Attempt

• iPhone is disabled.

Two things can happen on the tenth failed attempt to unlock your Apple iPhone 13 Pro. If you have Erase Data enabled, your phone’s data gets wiped. If it’s disabled, the Apple iPhone 13 Pro is permanently locked, requiring a connection to iTunes for restoration. It’s crucial to back up your data on iCloud or locally to avoid permanent loss.

Part 2. What Are the Consequences After Consecutive Failed Attempts?

When you exceed ten unsuccessful passcode entries, the Apple iPhone 13 Pro device takes stringent actions to protect sensitive data. It can initiate a data wipe or lock the iPhone, needing a connection to iTunes for restoration. After a series of failed attempts, the Apple iPhone 13 Pro can activate a security measure often referred to as a “self-destruct” mode.

To turn this mode on or off, follow these steps:

How To Enable Erase Data Mode

Safeguard your personal information with these simple steps to remotely wipe your device in case of loss or theft.

• Step 1: Go to Settings > Face ID & Passcode or Touch ID & Passcode, depending on your device. Enter your current passcode.

• Step 2: Scroll down and find the Erase Data option. Toggle the button to activate the feature.

How To Disable Erase Data Mode

Here are the steps to disable Erase Data Mode on your Apple iPhone 13 Pro, ensuring controlled access to your device.

• Step 1: Follow the same steps to access the Erase Data toggle. Next, disable the toggle to turn off this feature.
• Step 2: Confirm your choice, ensuring the “self-destruct” mode is deactivated to prevent accidental data loss.

Part 3. Top 5 Methods To Unlock an iPhone After Too Many Attempts

When wondering how many tries to unlock an iPhone, consider the following methods to restore functionality. The section below explores the most effective ways to regain access to your device. Let’s start with the use of a dedicated screen unlock tool.

Method 1: Using a Dedicated Screen Unlock Tool

When facing a disabled iPhone, Wondershare Dr.Fone - Screen Unlock (iOS) stands out as a reliable solution. It’s a comprehensive platform that unlocks iOS devices without a passcode. Here are some of the tool’s key features to help you get started:

• Removes all types of lock screens. Fone Screen Unlock tackles various lock screen types, like pattern lock, etc. It offers a comprehensive solution for different scenarios.
• Unlock Apple ID without a password. The tool provides a secure method to unlock Apple ID without needing a password.
• No data loss. Users can regain access without losing data, a crucial aspect of dealing with a disabled iPhone.
• High success rate.Fone Screen Unlock boasts a high success rate, instilling confidence in users seeking a swift and effective solution.

How To Unlock iPhone With Dr.Fone

After many failed passcode attempts on your Apple iPhone 13 Pro,Dr.Fone can help you access it again in no time. Follow the steps:

• Step 1: Download and install Dr.Fone on your computer. Next, click Toolbox > Screen Unlock > iOS to start. In the next window, choose Unlock iOS Screen.

• Step 2: Follow the on-screen instructions. Dr.Fone will automatically detect your Apple iPhone 13 Pro model. If necessary, choose the System Version according to your preference. Next, click Start to start the iOS firmware download.

• Step 3: Wait for the iOS firmware to download successfully. Click on Unlock Now to initiate the unlocking process. Follow the on-screen instructions again and wait for Dr.Fone to unlock your device. If unsuccessful, click on the Try again option.

Method 2: Using iTunes To Unlock a Locked or Disabled iPhone

An alternative method to unlock your Apple iPhone 13 Pro when locked or disabled involves using iTunes. Note that if your iTunes is not synchronized with the iPhone, you risk losing your existing data. Here’s how:

• Step 1: Launch iTunes on your computer. Connect your locked iPhone using a cable and let iTunes identify the Apple iPhone 13 Pro device. Next, navigate to the Summary section and select the Restore iPhone option.

• Step 2: Allow iTunes to identify your device. Start the restoration of previous data by selecting Restore Backup. Your Apple iPhone 13 Pro will be unlocked with all the associated data if you have backed up your information on iTunes. Otherwise, you will need to set it up as a new iPhone.

Method 3: Using Recovery Mode To Unlock a Locked or Disabled iPhone

Activating Recovery mode is another useful method for accessing a locked phone. The approach erases all data on the phone, restoring it to factory settings. Any data not backed up will be lost using this method. Follow the steps:

• Step 1: Download and Launch iTunes on your computer. Connect your Apple iPhone 13 Pro with a USB cable.
• Step 2: For iPhone 8 models or newer, press and release the volume up button, followed by the volume down button. Next, press and hold the power button. If executed, the iTunes connect screen will appear. For earlier iPhone models, you can refer to here.

• Step 3: iTunes will prompt you to either restore or update your Apple iPhone 13 Pro. Choose the Restore iPhone option to reset your device to its factory settings. If the restoration process extends beyond 15 minutes and your Apple iPhone 13 Pro exits recovery mode, you’ll need to repeat the steps.

Method 4: Using iCloud To Unlock a Lock or Disabled iPhone

After many failed passcode attempts on your Apple iPhone 13 Pro，it got disabled, but iCloud offers a convenient solution. Your phone must have the Find My iPhone option enabled for the method to work. You should be aware of the Apple ID password associated with your iCloud account. Once these prerequisites are fulfilled, access the iCloud account from another device. Here’s how.

• Step 1: Go to iCloud.com using another device, such as a computer, and log in with your Apple ID and password.

• Step 2: Select All Devices, and pick the locked iPhone from the dropdown menu. Once you’ve chosen the Apple iPhone 13 Pro device, click the Erase iPhone icon in the lower-right corner. Although the action deletes the data on the phone, you can retrieve it from your iCloud backup once the Apple iPhone 13 Pro device is operational again.

Method 5: Contact Apple Support or Visit an Apple Store

If all methods fail or you don’t have access to Dr.Fone, consider contacting Apple Support. You can also try visiting an Apple Store. Apple experts will guide you through the appropriate steps based on your unique situation.

Conclusion

If you are wondering how many passcode attempts on iPhone will lock your device and not sure how to fix this issue, here is the way to go. Methods like iTunes, Recovery Mode, iCloud, or seeking Apple Support all offer potential solutions.

Consider using Dr.Fone Screen Unlock (iOS) for a secure and data-preserving unlock. It safeguards your data even if you forget your passcode. Remember that surpassing the allowed attempts could result in data loss or permanent device disablement. Safeguard your data wisely by exploring these methods.

Tips: Are you searching for a powerful Screen Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

How Can I Unlock My Apple iPhone 13 Pro After Forgetting my PIN Code?

Unlocking a phone using a passcode is a great way to keep your data safe. To secure your device, you can set a 4-digit, 6-digit, fingerprint, or Face ID. However, what will happen if you forgot iPhone PIN? You will not be able to unlock and use the services of your device.

Furthermore, you can’t manage any vital task if you have scheduled it. In such cases, you need to unlock the lock through an efficient procedure. This article elaborates on such practical techniques for iPhone PIN code removal. We will also introduce the top tool available in the market.

All the solutions mentioned here are highly secure and work almost every time. So, if you are worried about the security of your device, we suggest you use Dr.Fone-Screen Unlock. It is the best tool in case of a forgotten iPhone PIN.

Part 1: 4 Simple Ways to Unlock iPhone without Pin

1. “Erase iPhone” option

The steps below work if your Apple iPhone 13 Pro or iPad runs iOS 15.2 or later and is connected to the internet. Here’s what you need to do when you forgot iPhone PIN:

• Please enter your password a few times from your device’s Lock Screen until it requests that you attempt another time. Then repeat this activity until you see the Erase iPhone choice in the corner of the screen.
• Tap Erase iPhone, then click again to confirm your activity.

• Enter your Apple account details to sign out of your Apple ID on the phone.
• Tap Erase iPhone back to erase all your user data and settings for all time.
• At the point when the iOS device restarts, adhere to the on-screen directions. Set your phone once more, and restore your data and settings from a backup. Now set a new password for your device.

Instructions to Restore a Locked iPhone Running iOS 15.1 or Prior

• To begin with, put your Apple iPhone 13 Pro into DFU recovery mode.
• Then, connect it to a PC or Macintosh through a Lightning link.
• Select your Apple iPhone 13 Pro in the Finder sidebar on Mac or iTunes on the PC.
• Pick Restore when you see the choice to Restore. Let the download finish if the download takes over 15 minutes and your device leaves the recovery mode screen. Then, at that point, turn off your Apple iPhone 13 Pro and start once more.

• Disconnect your Apple iPhone 13 Pro, then, at that point, turn it on and set it up. That’s all you need to do.

2. Use Find My iPhone in iCloud

Apple allows clients to erase iPhone data to safeguard it from others remotely. However, your lock screen can still protect your data if you don’t erase the iPhone. No one can unlock the screen unless they enter the correct password. After too many wrong password attempts, your Apple iPhone 13 Pro will be locked. So no one can then touch your user data.

If you have enabled the “Find My” option before forgotten iPhone PIN, there is a chance for you to remove the lock. That is to utilize iCloud.

To unlock iPhone through iCloud:

Step 1. Visit the iCloud.com web page and log in with your Apple ID and passcode.

Step 2. Click the “Find iPhone” option from the different choices available.

Step 3. Click “All Devices” and pick the Apple iPhone 13 Pro device you need to unlock.

Step 4. Click the “Erase iPhone” button. Subsequently, set up the Apple iPhone 13 Pro device and set another lock screen PIN. With iCloud, you can unlock your iDevice without even touching your device.

3. Unlock it with iTunes

Suppose you use iTunes to restore the Apple iPhone 13 Pro in recovery mode; it will install the latest iOS to your device. Doing so will erase all user data from the Apple iPhone 13 Pro device, including the lock screen. So, this is also an excellent way to unlock your Apple iPhone 13 Pro. However, you must keep a backup of your important files before doing so.

Utilizing iTunes will wipe out the iPhone. You can restore the data from there if you have a previous backup. If you have nothing, you will lose every data on the iPhone.

Additionally, ensure that you keep your iDevices’ Apple ID details safe. Else, you will not have the option to use the iDevice again. Using iTunes will erase the screen’s password but not the firmware. Considering that, you must keep the information in mind to set up and utilize the Apple iPhone 13 Pro device.

To sidestep iPhone password with iTunes:

Step 1. Go to Recovery mode

On iPhone 8/8 Or more and Above: Hold the power/side button and press any of the volume buttons until a slider appears. Move the slider to turn off the Apple iPhone 13 Pro device. Next, press and hold the power button and connect your Apple iPhone 13 Pro to the PC. Hold the button until the Apple iPhone 13 Pro device shows the recovery mode screen.

On iPhone 7/7 Or Below: Press and hold the power button until you see the power off slider. Next, move the slider to turn off the iPhone. Then, press the Volume (-) button and connect the Apple iPhone 13 Pro device to the PC. Continue to hold the button until you see the recovery mode screen.

Step 2. Restore your Apple iPhone 13 Pro.

After you connect your Apple iPhone 13 Pro to the PC, you will see a popup window in iTunes. It will warn about an issue with the “Your iPhone name” and ask you to restore it. In that window, select “Restore” to erase the iPhone. If iTunes doesn’t run naturally, open iTunes by double tapping it.

Step 3. Set up iPhone.

Keep waiting until the restoration completes. Then, a short time later, go to your Apple iPhone 13 Pro and follow the on-screen directions. That will allow you to set up and utilize your device.

4. Dr.Fone-Screen Unlock

What to do if you forgot iPhone PIN code? As a reference, you have to erase your device to remove the lock. Aside from iTunes, you can use an outsider iPhone unlocker like Dr.Fone-Screen Unlock to unlock your device without a code.

With such software, you don’t have to master some professional skills. Instead, stick to the on-screen directions in Wondershare Dr.Fone-Screen Unlock. Then, you can reset your locked device without any problem. Dr.Fone will eliminate it for you, whether it’s a four-digit code, six-digit code, Contact ID, or Face ID. Here’s how:

Step 1. Get your Device Connected

Install and open the program on a computer, i.e., Mac or Windows. Then, tap the “Screen Unlock” option.

Get your locked iPhone connected to the system utilizing a lightning USB connector. Following these steps, click the “Unlock iOS Screen” feature on the program.

Step 2. Boot the Recovery/DFU Mode on your Device

To unlock iPhone, you need to boot it in Recovery/DFU mode by following the guidelines on your screen. Therefore, the Recovery mode is a better choice for iPhone unlock. Yet, if you face problems while going for the Recovery mode, you may enact the DFU mode.

Step 3. Confirm Your Apple iPhone 13 Pro Model

After opening the recovery mode, you can see your Device Model and iOS version. You must select the correct data from the dropdown menu if the information is incorrect. After doing so, click download to download the suitable firmware package for your phone model.

Step 4. Remove the Screen Lock Passcode

After getting the required firmware, click the “Unlock Now” button to begin the process.

Simply in almost no time, your Apple iPhone 13 Pro will be unlocked effectively. However, kindly note this unlocking system will likewise wipe all the files and settings on your device. Therefore, you must have a backup of your essential documents beforehand.

Part 2: FAQs

How can I change my PIN on my iPhone?

• Open your Settings app and peer down until you see the passcode menu. On iPhones with a home button, this will be named “Touch ID and Passcode.” On new ones, it is “Face ID and Passcode.”

• Enter your existing code or create a new one.
• Toggle on the “Turn Passcode Off” option.
• Click again to agree, and you’re good to go.

What to do after unlocking my iPhone?

There are certain things you must do after unlocking your iDevice. First, you must immediately set a new PIN for your iDevice. Apart from that, restore your previous data if you have a backup. Having done so, you are good to go.

Can I access my locked iPhone without data loss?

No, you cannot unlock a locked iDevice without losing your data. Apple has made some outstanding security features in their phones. Therefore, you must erase all its content and settings if you need to get your hands on an unlocked phone again.

The Bottom Line

Due to one reason or another, you may have forgotten iPhone PIN. However, it is not that big a deal. In this article, we have proposed some of the best ways you can employ to erase this issue. However, we strongly recommend you use Dr.Fone for a quick solution.

How to Fix Apple iPhone 13 Pro Passcode not Working?

Apple has always been one of the top successful companies. The reason for its success can be clearly seen through its efforts in pioneering top-notch products. It not only puts its efforts into ensuring the perfect working of the Apple iPhone 13 Pro device but also provides the user with essential security measures to protect the data of the Apple iPhone 13 Pro device from unauthorized access.

This is the sole reason why Apple focuses so much on privacy through passcodes. But sometimes, these passcodes can be a hurdle in the working of the iPhone.

If you’re facing this issue, then you’ve come to the right place. This article shall cover your queries regarding fixing the Apple iPhone 13 Pro passcode that is not working and providing full-depth details for your ease.

Part 1: Why iPhone is Saying Passcode is Wrong?

If you enter the wrong password, your Apple iPhone 13 Pro will not accept it and won’t open your phone. If you repeatedly enter the wrong password, it will disable your phone mainly because of security reasons. However, sometimes you’re genuinely trying to enter the correct password, but your device won’t accept it. This isn’t common, but there are quite a few reasons why iPhone is saying your passcode is wrong.

Sometimes the problem is trivial, like you may have entered the wrong keys in a hurry, due to which it won’t accept your passcode. In other cases, face recognition may not recognize your face if you’re wearing any mask.

However, occasionally the problem is technical. Sometimes, your Apple iPhone 13 Pro may be corrupted. This can cause trouble for your device to detect the security file where your passcode is stored. Other times, the operating system may not be installed properly after updating to the new version of iOS.

Part 2: Remove iPhone Passcode with Dr.Fone Without Losing Data

Everyone in the field of tech is familiar with Wondershare as it is the most innovative and versatile software in the market. Dr.Fone is a toolkit containing data recovery, phone manager software, etc., introduced by Wondershare. One of the many reasons for its success is the intuitive interface that has made it convenient for professionals as well as amateurs.

When it comes to fixing your Apple iPhone 13 Pro passcode, which is not working, Wondershare Dr.Fone - Screen Unlock does wonders.

iTunes is another great way to bypass the activation screen without a SIM card. If you’re new to this, here’s a small guide on how to use iTunes to bypass the activation screen.

Dr.Fone - Screen Unlock (iOS)

Remove iPhone Passcode.

• If you don’t have access to iTunes, Dr.Fone is a great alternative.
• Compatible with all models of iPhone and other iOS devices.
• It resets the factory settings without requiring the passcode.
• It recovers data after resetting iPhone’s passcode.

3981454 people have downloaded it

Step 1: Connect Apple iPhone 13 Pro to your Computer

The first step is to connect your Apple iPhone 13 Pro to your computer via cable and install Wondershare Dr.Fone - Screen Unlock.

Step 2: Screen Unlock Tool

Select the “Screen Unlock” tool from the given tools on the home interface. Another interface will be displayed on the screen in which you’ve to select “Unlock iOS Screen.”

Step 3: DFU Mode

Before directly unlocking the Apple iPhone 13 Pro lock screen, you’ve to set it up in either Recovery mode or DFU mode. Mostly ‘Recovery Mode’ is recommended as it removes the passcode by default. However, if your device fails to activate it, you can opt for DFU mode.

Step 4: Download Firmware

Once your Apple iPhone 13 Pro is in DFU mode, another window will be displayed on the screen, asking for confirmation regarding the Apple iPhone 13 Pro device Model and System Version. Now click on the “Download” button placed at the bottom.

Step 5: Unlock your Apple iPhone 13 Pro.

After downloading the firmware, select “Unlock Now” to unlock your Apple iPhone 13 Pro.

Part 3: Effective Ways to Fix iPhone Password Not Working

This part shall assert its focus on the effective ways of resolving the issue involving the Apple iPhone 13 Pro password not working on your device. It revolves around the methods involving iTunes, iCloud, and iPhone Recovery Mode.

3.1 By using iTunes and iPhone Cables

iTunes is one of the most used and innovational software pioneered by Apple. It has proved to be the best software out there through its versatility and exceptional performance. This software is your savior if you’re looking for something to organize your files in iPhone as it has great integration with iOS.

If you want to fix your Apple iPhone 13 Pro passcode, which is not working, then iTunes can be an efficacious solution for your problem. Below we have explained step-by-step how to fix your passcode in iPhone using iTunes:

Step 1: Connect to Computer

The first step is to connect your Apple iPhone 13 Pro to the computer with which you’ve synced previously.

Step 2: Recovery Mode and Synchronize

Now open iTunes. If it asks for a passcode, try another computer that you’ve synced your device with. Else, put your phone to Recovery mode. Wait for iTunes to detect and sync your device. It will then create a backup.

Step 4: Restore

Once your device is synced with iTunes, a “Set Up” window will pop up on the screen displaying two options, “Restore” or “Update.” Select “Restore” to proceed further.

Step 5: Reset Passcode

Select your device and the appropriate backup for your device in iTunes. Once the process is completed, you can reset the passcode of your Apple iPhone 13 Pro in the settings.

3.2 Apple iCloud Feature

iCloud is a multifunctional drive compatible with iOS and macOS. It saves your data, your media and organizes your files in folders. Moreover, it allows the user to share media, data, files, and even location with the other iPhone/iOS user. The major feature of Apple iCloud is its ‘Backup’ which stores all your data in case you lose or damage your phone.

To fix the Apple iPhone 13 Pro passcode, which is not working, iCloud can come in handy. But this method can only work if you’ve logged in to your iCloud account on your Apple iPhone 13 Pro and your “Find My iPhone” application is turned on. All you have to do is erase your data which will automatically erase your passcode through iCloud.

Step 1: Sign in with Apple ID

First, open iCloud.com on another iOS and write your credentials to sign in your Apple ID.

Step 2: Select your Device

Click on “Find My iPhone” and select “All devices,” and a list of devices will come up which are working under the same Apple ID. Select your Apple iPhone 13 Pro.

Step 3: Erase Data and Set up your Apple iPhone 13 Pro.

Now click on the option of “Erase iPhone” to erase all your data and even your passcode. You have the autonomy to set up your Apple iPhone 13 Pro from a previous backup or set it up as a new device.

3.3 Using iPhone Recovery Mode

If you’ve never synced your Apple iPhone 13 Pro with iTunes or set up “Find my iPhone” and you’re out of options, then iPhone Recovery Mode can come to the rescue. Recovery Mode allows your Apple iPhone 13 Pro to connect with iTunes without restarting the system.

This process is quite time-consuming and different for different versions of the iPhone. Here we will guide you on how to fix the Apple iPhone 13 Pro passcode via Recovery Mode.

Step 1: Connect your device to the Computer

Connect your Apple iPhone 13 Pro to your computer and open iTunes.

Step 2: Activate Recovery Mode

Once the computer detects your Apple iPhone 13 Pro, it force restarts it. Activating Recovery Mode is different for different models of iPhone.

• For iPhone 6s and earlier versions: Press and hold the Home Button and the Power Button simultaneously.
• For iPhone 7 and 7 Plus: Press and hold the Power Button and Volume Down Button simultaneously.
• For iPhone 8 and latest versions: Press and release the Volume Down button instantly. Then again, press and release the Volume up button. Now press the Power Button till you see the option of “Recovery Mode.”

Step 3: Restore your Apple iPhone 13 Pro.

When you’re given the option of Restore or Update, choose ‘Restore.’ iTunes will automatically download the appropriate software.

Step 4: Set Up your Apple iPhone 13 Pro

Once the process has reached completion, set up your Apple iPhone 13 Pro, if this process takes more than 15 minutes, it will leave the Recovery Mode automatically and repeat the steps again.

Conclusion

This article has provided you the reasons and best possible ways to fix the issue of the Apple iPhone 13 Pro passcode not working in detail. You must follow these steps immediately if you’ve locked your Apple iPhone 13 Pro to avoid further trouble and anxiety.

We hope we have covered every bit of this article perfectly and you have successfully unlocked your Apple iPhone 13 Pro without any hassle.

Also read: