How to Unlock Apple iPhone SE (2020) without Passcode or Face ID

You can’t access your Apple iPhone SE (2020) because the Face ID isn’t working, and you forgot your passcode? So you are considering how to unlock iPhone without face ID or passcode. If so, this article will walk you through how to do that.

Firstly, one ought to realize that it is impossible to hack an iPhone passcode. Therefore, the primary way that attempts to unlock your device without a PIN or Face ID is to erase it. After reading this guide, you will figure out how to unlock iPhone without passcode or face ID. Keep reading to find out more and learn about the best tools in the business.

Part 1: Best Ways to Unlock iPhone without a Passcode or Face ID

1. Unlock it via Find My

• Go to the iCloud official site, and sign in to your iCloud account. The site will give you two or three choices when you log in. Click on “Find iPhone” to proceed.
• You will be taken to another interface. Click “All devices” and select the Apple iPhone SE (2020) on which you need to erase the passcode.
• Click on “Erase iPhone”, and afterwards affirm the decision. That’s the simplest solution for how to unlock iPhone without passcode or face ID.

2. Via iTunes

Step 1. Go to Recovery Mode

Entering the recovery mode requires various steps, given your Apple iPhone SE (2020) model or settings. Assuming you’re uncertain which one you have, check the rear of your phone or the client manual you got in the first box.

iPhone 8 and Above:

• Hold the Side button used to lock your screen and both Volume buttons. The power-off slider will show up on the screen.
• Drag the slider to one side to switch off your Apple iPhone SE (2020).
• Use a lightning connector to plug your Apple iPhone SE (2020) into a Macintosh or PC while holding the Side button.
• Keep holding the button until the recovery screen shows up.

iPhone 7/7 Plus:

• Hold the Side button used to lock your screen until the power-off slider shows up.
• Switch off your Apple iPhone SE (2020).
• Connect your Apple iPhone SE (2020) to a Macintosh or PC through a connector while holding the Volume (-) button.
• Continue to press the button until you get to recovery mode.

iPhone 6 or Below:

• Hold the Side or Top button and trust that the power-off slider will appear.
• Switch off your Apple iPhone SE (2020).
• Connect your Apple iPhone SE (2020) to a system through a connector while holding the Home button.
• Keep the Home button held until you see the recovery screen.

Step 2. Select your Device on your System

After entering recovery mode, you’ll have to continue on your Macintosh or PC. Then, contingent upon your OS, follow the aide underneath to begin unlocking your Apple iPhone SE (2020).

macOS Catalina

• Go to the Finder window.
• Your Apple iPhone SE (2020) will appear on the left half of the Finder window under Locations. You can tap on it to choose it.

macOS Mojave or a Windows with iTunes

If your gadget isn’t running macOS Catalina or later, you’ll need to involve iTunes to connect your Apple iPhone SE (2020). In the first place, download iTunes on your PC. Then, take the appropriate steps depending on which iTunes version you’re running:

• On iTunes 12 and newer, click on the Apple iPhone SE (2020) symbol in the upper-left corner of the iTunes window.
• On iTunes 11, click on the Apple iPhone SE (2020) tab on the right half of the iTunes window.
• On iTunes 10, the Apple iPhone SE (2020) will be in the sidebar on the left.

Step 3. Pick the Choice to Restore

When you’ve effectively connected and chosen your Apple iPhone SE (2020) on a Mac or a PC, tap on the Restore button. And that’s how to unlock iPhone without passcode or face ID.

3. DNS Server

The following steps explain how to unlock iPhone without face ID or passcode using a DNS server:

Step 1. Pick your LANGUAGE and COUNTRY from the lock screen menu after switching on a locked device.

Step 2. Click “Continue” to enter the WiFi settings page. Whenever requested to connect to WiFi, search for the “I” next to the WiFi tab.

Step 3. Disconnect your current network, go to “Network/connection Settings”, and click Forget.

Step 4. Click the “I” and enter a DNS server IP address to bypass the lock. IP addresses of different regions are given below:

• USA: 104.154.51.7
• South America: 35.199.88.219
• Europe: 104.155.28.90
• Asia: 104.155.220.58
• Australia and Oceania: 35.189.47.23
• Others: 78.100.17.60

Step 5. Then, click the “Back” choice at the left half of your screen, turn the WiFi on and select your network. Enter your WiFi passcode.

Step 6. Click Next Page > Back to enter the lock bypass screen. These are all the required steps for how to unlock iPhone without passcode or face ID 2022.

4. Dr.Fone-Screen Unlock

This section will introduce you to our most important solution. Yes, you heard it right. If you need a hassle-free method to unlock your iDevice without a passcode or face ID, use Wondershare Dr.Fone Screen Unlock.

Dr.Fone will not only remove the screen lock but also make sure to keep your identity safe. In addition, it is the easiest method and requires no prior knowledge. So if you are someone new to this technology, we suggest you follow the steps below:

Step 1. Launch the Software on your PC

After successfully installing Dr.Fone on your PC, open it and select the “Screen Unlock” tool from the main interface.

Next, connect your locked phone to the system through a wired connection. Then go for the iOS screen unlock feature.

Step 2. Recovery or DFU Mode Boot

It is necessary to first boot your locked device in recovery or DFU mode. Follow the guidelines on your screen to do so. The Recovery mode is the suggested way for iOS screen locks. If you can’t actuate this mode, go for the DFU mode boot.

Step 3. Select your Apple iPhone SE (2020) Model

After the phone is in recovery/DFU mode, the program will show the locked device’s information. Here you can see the model and iOS variant of the Apple iPhone SE (2020) device. If it isn’t correct, you could choose the right one from the dropdown menu next to it. After that, click the Download button to get the required firmware for your locked phone.

Step 4. Remove the Screen Lock

After downloading the firmware effectively, click the “Unlock Now” button to let Dr.Fone unlock your Apple iPhone SE (2020).

Simply in no time, Dr.Fone will successfully unlock your device.

Note: This unlocking process will erase everything off your Apple iPhone SE (2020) and bring it to the factory default state. Indeed, no other method that doesn’t allow data erasure at the moment.

Part 2: How to Turn Off Passcode or Face ID on My Device?

Face ID can be a helpful method for unlocking your Apple iPhone SE (2020) - by simply looking at your phone. However, a few clients might worry that it’s not as secure as utilizing a PIN to open your phone. If that is the best case for you, you can follow this manual to disable Face ID and depend on a passcode.

Here’s the step-by-step guide to the most effective method to switch off Face ID on the iPhone:

1. Open the Settings application

First, tap on your Settings app to open it. That is the one on the home screen with a symbol like the mechanical gear.

2. Tap on Face ID and Passcode

On the Settings menu, tap on the Face ID and Passcode menu.

3. Enter your passcode

At this stage, you’ll be approached to enter your passcode, so do this to get to the Face ID and Passcode menu.

4. Switch off Face ID

You’ll have the option to turn off the switch for Face ID across different activities, including the phone unlock.

Part 3: Can I bypass my iPhone Face ID with a picture?

As indicated by Apple, the short and obvious answer is no.

FaceID isn’t simply a camera snapping a picture. It utilizes an exceptional chip to filter the face with many spots. It makes a 3D contour of the look that works in low, glorious light around evening time, and your eyes must be opened. The opportunity to randomly unlock an iPhone with FaceID is 1/1 million, compared to 1/50000 with Touch ID.

It doesn’t work by snapping a picture of your face, but by taking a contour of your face if you utilize a camera that can see infrared. However, a photograph is a level and cannot give a dab matrix required for Face ID to work. You may be holding a clear piece of paper before the phone.

The Bottom Line

That’s all about our take on how to unlock iPhone without passcode or face ID 2022. We have worked hard to make sure you get the right solutions in hand. However, we strongly suggest Dr.Fone if you still face issues with our solutions. Even if the above methods fail, Dr.Fone will ensure you unlock your phone.

Did Your Apple iPhone SE (2020) Passcode Change Itself? Unlock It Now

The Apple iPhone SE (2020) changing passcodes itself is not a commonly reported issue, but it surely can happen to anyone. While the reasons are uncertain, the issue can be resolved without putting much strain on your device. If you face this iPhone passcode changed itself issue by any chance, it makes it hard for you to get into your Apple iPhone SE (2020).

However, you don’t need to worry, as this well-organized guide provides authentic methods to solve this issue. You will also find a bonus tool to fix your iPhone/iPad passcode changed itself issue without any need of knowledge.

Part 1. What Are the Reasons for iPhone Passcode Changing by Itself

Before solving the Apple iPhone SE (2020) or iPad passcode changed itself issue, you should know the actual reason behind it. Here are some points that precisely explain why the Apple iPhone SE (2020) changed its passcode by itself:

1. Frequent iOS Updates: One major issue that can cause the problem of iPhone passcodes changing by itself is the ongoing iOS updates. An update can sometimes cause major glitches in the Apple iPhone SE (2020) device, which might automatically change the credentials.
2. iOS System Error: Many users are reportedly known for installing and using the Beta version of iOS on their iPhones/iPads. These versions are known to hold major glitches and bugs in the software. Usually, the Apple iPhone SE (2020) changing passcode issue is normally reported by users under such scenarios.
3. Malware: Malicious apps can damage your system security and make your iOS device change the passcode automatically. This can either happen due to device hacking or system security breaches.

Part 2. [The Simplest Solution] Remove iPhone Passcodes With Wondershare Dr.Fone

There are multiple ways to resolve the “iPhone changed passcode itself” issue, but they can be consistently difficult. Here, Wondershare Dr.Fone provides the simplest solution to fix your Apple iPhone SE (2020) without putting any effort. When fixing your Apple iPhone SE (2020)’s screen locks, Wondershare Dr.Fone caters to different scenarios. From Touch ID to Face ID and other basic screen locks, this tool unlocks it within minutes.

It clearly shows that you can easily get yourselves out of the miserable iPhone changed passcode itself issue. This is not only what Wondershare Dr.Fone offers its users. You can also find a high success rate for unlocking carrier and MDM locks.

Key Features of Wondershare Dr.Fone

1. Wondershare Dr.Fone is compatible with all iOS devices up to iOS 17, which allows everyone to get help using its advanced functionality.
2. If you lose access to your Apple ID, it can bypass the iCloud Activation Lock and help you set up your iOS device like a new one.
3. Without damaging the data, Wondershare Dr.Fone allows you to remove the iTunes backup encryption . This allows you to back up, restore, transfer, or easily wipe out your device’s data.

Comprehensive Guide To Unlock Screen Using Wondershare Dr.Fone

Wondershare Dr.Fone provides the simplest solution to unlock your Apple iPhone SE (2020) and remove the passcode change issue. Follow this step-by-step guide to complete the screen unlocking process without wasting any time:

• Step 1. Start Tool and Choose Screen Unlock Function

Initially, launch Wondershare Dr.Fone on your computer and connect it to your concerned iPhone. Go into the “Toolbox” and choose the “Screen Unlock” function from the given options. Next, select “iOS” to run the process for the iOS device. Choose the “Unlock iOS Screen” option and hit the “Start” button to initiate the unlocking process.

• Step 2. Put Your Apple iPhone SE (2020) in Recovery Mode and Confirm Status

After that, follow the on-screen instructions to put your Apple iPhone SE (2020) in the Recovery Mode. In the next window, you can see your device model recognized. Then, enter your “System Version” and hit the “Start” button again to continue.

• Step 3. Download iOS Firmware and Confirm

Then, the system starts downloading the required iOS firmware according to your Apple iPhone SE (2020) model. Once the download is complete, click “Unlock Now” to implement the screen unlocking process. Enter the code in the confirmation box in the next window and choose the “Unlock” option.

• Step 4. Install iOS Firmware To Unlock Completely

After that, you can see a progress bar of the unlocking screen process. Then, it takes you to the next window after completion, where you click the “Done” button to accomplish the process.

Part 3. Set Up the Apple iPhone SE (2020) device Again Using the Security Lockout Procedure

Security Lockout or “iPhone Unavailable” happens when you attempt a wrong passcode 10 times. From there, you need to erase all your Apple iPhone SE (2020) data to regain access to the iOS device again.

While there is no direct way to regain access to your device when its passcode changes, you will have to perform a factory reset on your Apple iPhone SE (2020) to make it reusable. For that, look through the comprehensive guide on how to take your device out of this state:

• Step 1. After getting your iOS 17 device into the “iPhone Unavailable” stage, tap the “Forgot Passcode?” option in the bottom right corner.
• Step 2. To start the Apple iPhone SE (2020) reset, you need to tap on the “Start iPhone Reset.” Then, enter your Apple ID password in the given box and sign out your Apple ID. If you have an eSIM, you will be prompted with an option. Select the “Keep eSIM and Erase Data” or the “Delete eSIM and Erase Data” option according to your choice.

In another case, Apple allows you to temporarily sign in to your Apple iPhone SE (2020) using a recently changed passcode within 72 hours. But once you get into your device, set a new passcode immediately to retain your full access.

Part 4. Using iTunes To Set Up iOS Device Again

iTunes service allows you to reset your Apple iPhone SE (2020) to factory settings and unlock the screen lock if the Apple iPhone SE (2020) passcode changes on its own. Using iTunes to set up your Apple iPhone SE (2020) again is a good and safe method, but it removes your device data. If you can compromise losing data, you can follow these instructions to remove the Apple iPhone SE (2020) Passcode Changed Itself issue using iTunes:

Instructions. Firstly, launch iTunes on your desktop and connect your Apple iPhone SE (2020). Then, you need to progress into putting your Apple iPhone SE (2020) in the Recovery Mode . Continuing this, iTunes detects your device in Recovery Mode and shows two options: “Update” or “Restore.” Click on the “Restore” option and hit the “OK” button to restore your Apple iPhone SE (2020) and regain access.

Part 5. Using iCloud To Set Up iOS Device Again

Using iCloud to unlock iOS devices is a safe and recommended method, but it also leads to complete data loss. If you wish to consider using the iCloud method, it is important for the Find My service to be active on the Apple iPhone SE (2020) device. Also, you need to be aware of your Apple ID and password before proceeding. Follow this comprehensive guide step-by-step to set up your iOS device again using iCloud.

• Step 1. First of all, open iCloud on your desktop web browser. Afterward, enter your “Apple ID” and “Password” to proceed. After trusting the Apple iPhone SE (2020) device, look for the “Grid” icon on the top right to find the “Find My” option in the list.

• Step 2. After that, choose the Apple iPhone SE (2020) device that you want to recover. Then, click the “Erase This Device” option to remove data and regain your device access.

Part 6. Using Find My App To Set Up iOS Device Again

This method needs you to have another iOS device signed into the same Apple ID with the Find My option enabled. After fulfilling these preconditions, you can follow these steps to set up your device whose iPhone passcode changed from 4 to 6 digits by itself:

• Step 1. Launch the Find My App on any other device, select the “Devices” tab from the bottom menu, find your locked iPhone in the list, and tap on that.
• Step 2. You must select the “Erase This Device” button to remove it from the iCloud account. This will instantly factory reset the Apple iPhone SE (2020) device as if it is a new iOS device.

Bonus Tip. How To Change Passcode on iPhone: A Simple Guide

We’ve discussed various reasons why the iPhone passcode changed itself above. However, there are several instances where you want to change the passcode yourself. What to do if you are looking for an effective way to change your Apple iPhone SE (2020)’s passcode? Follow the simple step-by-step guide to change the passcode from the iDevice’s “Settings:”

• Step 1. First, open iPhone “Settings” and go to the “Face ID & Passcode” option to access the Apple iPhone SE (2020) device’s security settings.

• Step 2. After that, tap “Change Passcode” and enter your six-digit passcode to see passcode options. Open “Passcode Options” and set a four-digit passcode easily or vice versa.

Conclusion

In this article, we’ve gone through the scenario of iPhone/iPad passcode changing itself due to system glitches. To fix this problem, we have introduced some effective and reliable methods with simple steps. However, Wondershare Dr.Fone is the recommended tool to bypass this issue because it provides a high success rate with an easy-to-follow system.

Tips: Are you searching for a powerful Screen Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

Reset iTunes Backup Password Of Apple iPhone SE (2020): Prevention & Solution

When you back up the data from your Apple iPhone SE (2020), iPad, or iPod touch, you will have a copy of the information stored on those devices. It’s free to use iTunes, iCloud, or both to back up your device.

If you have forgotten the password to your backup, you may reset your Apple iPhone SE (2020) backup password by following these instructions. The process to reset the iTunes backup password is simple within only a few minutes.

To get started, please follow the instructions that are listed below.

Part 1: iPhone Backup Encryption Specifications

A safety precaution that may be taken to prevent unwanted access to your Apple iPhone SE (2020) backups is using a password for the backups themselves.

If you forget your password, you will be required to reset it before being able to access your backups again.

iCloud and iTunes Backup Password

Resetting your password may be done in different methods, depending on whether or not you have an iCloud account. You may reset your iCloud password by visiting the iCloud website and following the steps. This requires that you already have an iCloud account.

Connecting your device to a computer and using the iTunes program will allow you to reset your password even if you do not have an iCloud account. After successfully changing your password, you can access your backups the same way as before.

To improve the safety of your Apple iPhone SE (2020) backup, you should first change the password for your iTunes backup. This will guarantee that no one else can see your backup file and that only you can access it. No one else will have chance to get it.

Basic Ways for Password Security

To reset your password, go to the Preferences menu in iTunes, and click on the Reset Password button. You will be prompted to enter your old password and a new one. Please choose a strong password that cannot be easily guessed.

Another way to enhance the security of your Apple iPhone SE (2020) backup is to use iCloud instead of iTunes. iCloud offers an extra layer of security, as your backup file will be encrypted when transmitted to iCloud.

In addition, iCloud requires you to enter your Apple ID and password to access your backup file. This means that only you can access your backup and that it will be more difficult for someone else to gain access to it.

Forgot your Apple iPhone SE (2020) backup password? Don’t worry, and we can help!

Our step-by-step guide will show you how to reset iPhone backup password in minutes. Follow these simple steps, and you’ll be able to access your backed-up data in no time. We guarantee it!

Follow on to learn how to reset your Apple iPhone SE (2020) backup password now!

1. “Reset All Settings” in “Settings.”

Get into Settings on your iOS device, then choose General, and Reset.

Now, go to Reset All Settings and confirm by entering the security passcode. Your phone will reset to the default setting. Get rid of the password for the last backup without deleting any other apps or data.

2. “Back Up Now” in “iCloud.”

If you already have a backup stored in iCloud, you may use iCloud to reset the encryption password iPhone.

Turn on the mobile and look for the “Hello” screen. If you have previously set up your Apple iPhone SE (2020), you must delete or remove all of the material before continuing.

Navigate to the Apps & Data menu, and choose the Restore from iCloud Backup option.

After successfully signing in with your Apple ID, choose Backup.

3. Find it back in the macOS keychain

Launch Keychain Access by going to Application, then Utilities, and choose Keychain Access once your Mac has booted up.

Check for a backup by entering it into the search box and looking for it there.

Double-click Show Password, and choose it from the drop-down menu. The password for your Apple iPhone SE (2020) backup will be shown, and you can reset iTunes backup password now!

Bonus Tips: Best App to Remove iTunes Backup Password

Do you have a loved one’s locked iPhone and don’t know the passcode?

Dr.Fone - Screen Unlock is the world’s first and only tool to remove any lock screen on an iPhone, iPad, or iPod without knowing the password. It also unlocks iCloud locks, removes MDM profiles, and bypasses MDM locks without data loss.

So, whether your loved one has forgotten their screen lock code, had their phone stolen, or is stuck on the activation lock screen, Dr.Fone Screen Unlock can help.

The process is simple -download the software, connect your Apple iPhone SE (2020) to your computer, click a few buttons, and voila! Your device is unlocked with no data loss. And there’s no need to jailbreak your device or enter any passwords - it’s all done with just a few clicks.

With Dr.Fone - Screen Unlock, you can easily follow the steps to remove iTunes backup password.

Step 1: Install Dr.Fone, launch it and select the red button “Screen Unlock.”

Step 2: Go to the Screen Unlock interface, tap on “Remove iTunes BackUp Encryption” on the bottom right to reset the encryption password iPhone.

Step 3: Connect your iOS device to the PC via a USB cable. You will see the image if Dr.Fone can detect this connection.

Click “Remove Now”

• Make sure “Find My iPhone” is off.
• Do not open “iTunes” in the process.
• Your device will reboot in the process of removing

Step 4: Dr.Fone will verify and remove your iTunes backup password when the progress bar reaches 100%

Step 5: iTunes backup encryption is removed successfully! You can now reset iTunes backup password without any trouble.

Part 4: Tips to Keep Your Apple iPhone SE (2020) Backup Password

1. Use birthday as password

It is essential to use a password that is both robust and one of a kind if you want to have the safety of the backup password for your Apple iPhone SE (2020).

Using your birthdate as the password is one approach that has shown to be useful. This strategy helps guarantee that your password is not readily guessed or cracked while at the same time ensuring that it is simple for you to remember.

2. Use a third-party app to keep it

There is a wide selection of third-party software on the market that may assist you in maintaining the privacy and integrity of the data stored on your Apple iPhone SE (2020).

These applications cannot only safeguard your data but also add additional levels of protection, making it impossible for anybody else, even if they know the password, to access the data.

KeepSafe and Norton Zone are just examples of the many different programs available. Not only will your Apple iPhone SE (2020) backup password be safe and secure with these programs, but other crucial information stored on your phone will also be protected.

3. Write it down on a note

If you need to change your Apple iPhone SE (2020)’s backup password but have forgotten it, you’ll know how aggravating it is. Passwords can be difficult to keep straight in your head even after you’ve exhausted the most obvious possibilities.

Fortunately, you can save your password as a note on your Apple iPhone SE (2020) and access it whenever necessary. If you store the note somewhere secure (like a password-protected notes app or a master password manager), you shouldn’t have any problems.

Launch Notes and make a new note to do this. After that, you may protect the message with a password and save it.

You may now easily access your backup password by referring to the note. Though it’s not ideal, it’s better than losing track of your password and starting over from scratch.

The Bottom Line

The process to reset iPhone’s backup password is not as complicated as you think and can be completed in a matter of minutes. You may quickly and reset your password and go back to using your phone by following the steps outlined above.

Dr.Fone - Screen Unlock is the easiest method to delete the password from your iTunes backup. This program makes regaining access to your phone and its contents as simple as tapping a screen. If you want to avoid going through this procedure again, be sure to implement the suggestions provided in Section 3.