How to Unlock Apple iPhone SE without Passcode or Face ID

You can’t access your Apple iPhone SE because the Face ID isn’t working, and you forgot your passcode? So you are considering how to unlock iPhone without face ID or passcode. If so, this article will walk you through how to do that.

Firstly, one ought to realize that it is impossible to hack an iPhone passcode. Therefore, the primary way that attempts to unlock your device without a PIN or Face ID is to erase it. After reading this guide, you will figure out how to unlock iPhone without passcode or face ID. Keep reading to find out more and learn about the best tools in the business.

Part 1: Best Ways to Unlock iPhone without a Passcode or Face ID

1. Unlock it via Find My

• Go to the iCloud official site, and sign in to your iCloud account. The site will give you two or three choices when you log in. Click on “Find iPhone” to proceed.
• You will be taken to another interface. Click “All devices” and select the Apple iPhone SE on which you need to erase the passcode.
• Click on “Erase iPhone”, and afterwards affirm the decision. That’s the simplest solution for how to unlock iPhone without passcode or face ID.

2. Via iTunes

Step 1. Go to Recovery Mode

Entering the recovery mode requires various steps, given your Apple iPhone SE model or settings. Assuming you’re uncertain which one you have, check the rear of your phone or the client manual you got in the first box.

iPhone 8 and Above:

• Hold the Side button used to lock your screen and both Volume buttons. The power-off slider will show up on the screen.
• Drag the slider to one side to switch off your Apple iPhone SE.
• Use a lightning connector to plug your Apple iPhone SE into a Macintosh or PC while holding the Side button.
• Keep holding the button until the recovery screen shows up.

iPhone 7/7 Plus:

• Hold the Side button used to lock your screen until the power-off slider shows up.
• Switch off your Apple iPhone SE.
• Connect your Apple iPhone SE to a Macintosh or PC through a connector while holding the Volume (-) button.
• Continue to press the button until you get to recovery mode.

iPhone 6 or Below:

• Hold the Side or Top button and trust that the power-off slider will appear.
• Switch off your Apple iPhone SE.
• Connect your Apple iPhone SE to a system through a connector while holding the Home button.
• Keep the Home button held until you see the recovery screen.

Step 2. Select your Device on your System

After entering recovery mode, you’ll have to continue on your Macintosh or PC. Then, contingent upon your OS, follow the aide underneath to begin unlocking your Apple iPhone SE.

macOS Catalina

• Go to the Finder window.
• Your Apple iPhone SE will appear on the left half of the Finder window under Locations. You can tap on it to choose it.

macOS Mojave or a Windows with iTunes

If your gadget isn’t running macOS Catalina or later, you’ll need to involve iTunes to connect your Apple iPhone SE. In the first place, download iTunes on your PC. Then, take the appropriate steps depending on which iTunes version you’re running:

• On iTunes 12 and newer, click on the Apple iPhone SE symbol in the upper-left corner of the iTunes window.
• On iTunes 11, click on the Apple iPhone SE tab on the right half of the iTunes window.
• On iTunes 10, the Apple iPhone SE will be in the sidebar on the left.

Step 3. Pick the Choice to Restore

When you’ve effectively connected and chosen your Apple iPhone SE on a Mac or a PC, tap on the Restore button. And that’s how to unlock iPhone without passcode or face ID.

3. DNS Server

The following steps explain how to unlock iPhone without face ID or passcode using a DNS server:

Step 1. Pick your LANGUAGE and COUNTRY from the lock screen menu after switching on a locked device.

Step 2. Click “Continue” to enter the WiFi settings page. Whenever requested to connect to WiFi, search for the “I” next to the WiFi tab.

Step 3. Disconnect your current network, go to “Network/connection Settings”, and click Forget.

Step 4. Click the “I” and enter a DNS server IP address to bypass the lock. IP addresses of different regions are given below:

• USA: 104.154.51.7
• South America: 35.199.88.219
• Europe: 104.155.28.90
• Asia: 104.155.220.58
• Australia and Oceania: 35.189.47.23
• Others: 78.100.17.60

Step 5. Then, click the “Back” choice at the left half of your screen, turn the WiFi on and select your network. Enter your WiFi passcode.

Step 6. Click Next Page > Back to enter the lock bypass screen. These are all the required steps for how to unlock iPhone without passcode or face ID 2022.

4. Dr.Fone-Screen Unlock

This section will introduce you to our most important solution. Yes, you heard it right. If you need a hassle-free method to unlock your iDevice without a passcode or face ID, use Wondershare Dr.Fone Screen Unlock.

Dr.Fone will not only remove the screen lock but also make sure to keep your identity safe. In addition, it is the easiest method and requires no prior knowledge. So if you are someone new to this technology, we suggest you follow the steps below:

Step 1. Launch the Software on your PC

After successfully installing Dr.Fone on your PC, open it and select the “Screen Unlock” tool from the main interface.

Next, connect your locked phone to the system through a wired connection. Then go for the iOS screen unlock feature.

Step 2. Recovery or DFU Mode Boot

It is necessary to first boot your locked device in recovery or DFU mode. Follow the guidelines on your screen to do so. The Recovery mode is the suggested way for iOS screen locks. If you can’t actuate this mode, go for the DFU mode boot.

Step 3. Select your Apple iPhone SE Model

After the phone is in recovery/DFU mode, the program will show the locked device’s information. Here you can see the model and iOS variant of the Apple iPhone SE device. If it isn’t correct, you could choose the right one from the dropdown menu next to it. After that, click the Download button to get the required firmware for your locked phone.

Step 4. Remove the Screen Lock

After downloading the firmware effectively, click the “Unlock Now” button to let Dr.Fone unlock your Apple iPhone SE.

Simply in no time, Dr.Fone will successfully unlock your device.

Note: This unlocking process will erase everything off your Apple iPhone SE and bring it to the factory default state. Indeed, no other method that doesn’t allow data erasure at the moment.

Part 2: How to Turn Off Passcode or Face ID on My Device?

Face ID can be a helpful method for unlocking your Apple iPhone SE - by simply looking at your phone. However, a few clients might worry that it’s not as secure as utilizing a PIN to open your phone. If that is the best case for you, you can follow this manual to disable Face ID and depend on a passcode.

Here’s the step-by-step guide to the most effective method to switch off Face ID on the iPhone:

1. Open the Settings application

First, tap on your Settings app to open it. That is the one on the home screen with a symbol like the mechanical gear.

2. Tap on Face ID and Passcode

On the Settings menu, tap on the Face ID and Passcode menu.

3. Enter your passcode

At this stage, you’ll be approached to enter your passcode, so do this to get to the Face ID and Passcode menu.

4. Switch off Face ID

You’ll have the option to turn off the switch for Face ID across different activities, including the phone unlock.

Part 3: Can I bypass my iPhone Face ID with a picture?

As indicated by Apple, the short and obvious answer is no.

FaceID isn’t simply a camera snapping a picture. It utilizes an exceptional chip to filter the face with many spots. It makes a 3D contour of the look that works in low, glorious light around evening time, and your eyes must be opened. The opportunity to randomly unlock an iPhone with FaceID is 1/1 million, compared to 1/50000 with Touch ID.

It doesn’t work by snapping a picture of your face, but by taking a contour of your face if you utilize a camera that can see infrared. However, a photograph is a level and cannot give a dab matrix required for Face ID to work. You may be holding a clear piece of paper before the phone.

The Bottom Line

That’s all about our take on how to unlock iPhone without passcode or face ID 2022. We have worked hard to make sure you get the right solutions in hand. However, we strongly suggest Dr.Fone if you still face issues with our solutions. Even if the above methods fail, Dr.Fone will ensure you unlock your phone.

How to Access Your Apple iPhone SE When You Forget the Passcode?

We all have secrets in our iPhone or some important financial or business data that we all wish to protect from unwanted access. For this, we set up a passcode. But what if Apple iPhone SE passcode is forgotten by you? Well, you may now wonder how to perform Apple iPhone SE passcode bypass, right? Worry no more! We’re right here to help you with the proven solutions for Apple iPhone SE passcode reset without iTunes or with it too. Let’s explore.

Part 1. Unlock Apple iPhone SE screen passcode in one click (unlock tool needed)

The first and the ultimate measure for Apple iPhone SE passcode removal in just a matter of a single click is Dr.Fone - Screen Unlock (iOS) . With the help of this mighty tool, performing Apple iPhone SE passcode reset is even easier than any other alternative. Not only it can perform Apple iPhone SE passcode bypass, you can also make use of this tool to bypass lock screen of an Android smartphone too. Isn’t it amazing? Moreover, this powerful tool works effortlessly with the latest iOS 13 version and even with the most recent iPhone models as well. Here is the step by step tutorial on Apple iPhone SE passcode bypass.

Step 1: Install and launch Dr.Fone - Screen Unlock (iOS)

Get the tool Dr.Fone - Screen Unlock (iOS) downloaded and installed over your computer system. Then establish a connection between your computer and iPhone.

Now, launch the tool and then opt for the “Unlock” tile from the main screen.

Step 2: Boot in Recovery/DFU mode

Next move that you need to perform is to opt for the correct mode, i.e. “Unlock iOS Screen”. Then, you’ll be prompted to boot your device in Recovery/DFU mode. The on-screen instructions will guide you on how to do it.

Step 3: Double-Check iPhone information

On the upcoming screen, you’ll be displayed the “Device Model” and most recent “System Version” which is compatible with your Apple iPhone SE. Simply, hit the “Start” button here.

Step 4: Perform Apple iPhone SE passcode removal

Once, the software downloads the firmware automatically, you can then proceed to Apple iPhone SE passcode reset. Hit the “Unlock Now” button over the next screen and in a short while you’ll be notified that Apple iPhone SE passcode removal is completed.

safe & secure

Part 2. Restore an iTunes backup for Apple iPhone SE

Here we’re going to be familiar with the Apple iPhone SE passcode reset using the renowned iOS data management tool, iTunes. But be sure that iTunes version installed over your computer is up to date or else unknown errors may crop up in between. Eventually, your all-new Apple iPhone SE may even get bricked. Think this is it? Well, here’s another problem with iTunes, you need to get your Apple iPhone SE connected only to a pre-synced or pre-trusted computer. Or else, this tutorial won’t bring any good to you.

Step 1: First, get your Apple iPhone SE connected to your PC. Then, launch the iTunes most recent version. It will automatically detect your Apple iPhone SE. Once detected, tap the “Device” icon over the left top corner of iTunes.

Step 2: Then, hit the “Summary” option from the left panel and then you need to hit the “Restore iPhone” button. Confirm your actions by simply pushing the “Restore” button on the pop-up message and you’re done. Now, just wait for the process to complete.

Part 3. Restore Apple iPhone SE in recovery mode to remove screen passcode

If somehow, the above solution fails and you’re just not able to get Apple iPhone SE passcode reset. You need to boot your device into recovery mode and then perform the factory reset. This would certainly wipe off everything from your Apple iPhone SE including the passcode as well. Here are the steps involved in booting your Apple iPhone SE in recovery mode.

• First things first, power off your Apple iPhone SE by pushing the “Side” button down along with either of the “Volume” button. Keep them pressed till you get to see “Power-off” slider over your screen. Now, simply drag it to power off your device.
• Next, connect your Apple iPhone SE and your computer firmly with the help of an authentic cable. Please make sure to press and hold the “Side” button meanwhile.
• Ensure not to let go the Side button till the recovery mode screen appears over your Apple iPhone SE.

• Once the Apple iPhone SE device is booted in recovery mode, iTunes will throw a pop up message that “iTunes has detected an iPhone in recovery mode”. Simply, hit the “OK” button over the message and then push the “Restore iPhone” button followed by confirming your actions.

Part 4. Use “Find iPhone” from iCloud

The next pro tutorial for Apple iPhone SE passcode removal is via iCloud. For this, grad access to any computer available on your side. Or, you can also make use of any other smartphone device but ensure it must be connected to a WiFi network or have an active data pack. Moreover, the locked iPhone on which you’re going to perform Apple iPhone SE passcode reset should also have an active internet connection to make this tutorial work.

Note: Since we’re going to unlock your Apple iPhone SE using Find My iPhone service of iCloud. It is important that “Find My iPhone” service was enabled beforehand over your Apple iPhone SE.

Step 1: Launch the browser over any other smartphone device or computer. Then, visit the official web page iCloud.com.

Step 2: Now, make use of same Apple account configured with your Apple iPhone SE to sign in to iCloud. Then, opt for the “Find My iPhone” icon over the launch pad.

Step 3: Next, tap on the “All Devices” drop-down menu available over the top midsection and then select the Apple iPhone SE that you wish to bypass the passcode off.

Step 4: Then, you’ll get to witness a pop-up window over your screen. Tap the “Erase iPhone” button over it and then confirm your actions. All the settings and data will be wiped off remotely from your Apple iPhone SE now.

Step 5: Lastly, wait for the process to complete and upon completion set up your device as usual.

Part 5. How about Apple iPhone SE restrictions passcode?

Apple iPhone SE restrictions is a vital setting that is used to lock down a set of functions of the iPhone. These iPhone restrictions are also known as Parental Controls. That implies one can make use of these settings to block or hide songs that have explicit lyrics/content or barring YouTube from running, etc.

It is vital to set up a 4 digit passcode if you want to use iPhone restriction settings. Now, if you somehow forgot the passcode that was set to make use of iPhone restrictions, you need to restore your Apple iPhone SE with the help of iTunes to remove the previous passcode. But ensure not to restore an old backup of iPhone or else, the old passcode which you may not know will also get activated. Eventually, making your situation even worse.

Reset/Change Apple iPhone SE restrictions passcode

Now, in case you know the Apple iPhone SE restrictions passcode and just wish to reset it. Then follow the streak of steps mentioned below.

1. Launch “Settings” of your Apple iPhone SE and then get into “General” followed by “Restrictions”. Now, you’ll be asked to key in the current passcode.

1. Once you’ve entered the current passcode, hit on the “Disable Restrictions” and to confirm your actions, key in your passcode when prompted.

1. Lastly, hit on “Enable Restrictions”. You’ll be asked to set up a new passcode now. Do it and you’re done.

How Do You Unlock your Apple iPhone SE? Learn All 4 Methods

The Apple Watch symbolizes a world of convenience right on your wrist. Its array of features smoothly integrates into various aspects of our lives. It boosts each aspect, from fitness tracking and connectivity to style and personalization. Whether tracking your heart rate or responding to texts while on the go, the Apple Watch proves helpful.

Yet, there come moments when users might accidentally lock their Apple Watch. It could be due to forgetting a passcode or getting a second-hand locked device. Encountering a locked Apple Watch can be perplexing regardless of the root cause. This article will guide you on how to unlock an Apple Watch.

Part 1. Is It Possible To Unlock the Apple Watch Without a Passcode or Paired Phone?

When it comes to a locked Apple Watch, how to unlock it becomes essential. Unlocking the Apple Watch might seem complicated, especially without a passcode or paired phone. However, rest assured, there are multiple methods available to regain access. These solutions offer diverse perspectives on resolving the issue. It ensures you’re not reliant solely on the passcode or a connected phone to unlock your device.

Part 2. How To Unlock Apple Watch With Passcode or Paired Phone?

Do you have the passcode and your Apple Watch paired with an iPhone? It makes the how do I unlock my Apple Watch process swift and effortless.

• Step 1. Once your Apple Watch and iPhone are nearby, open the Apple Watch app on your Apple iPhone SE. Here, select the “My Watch” tab, navigate to it, and tap “General.”

• Step 2. Within the “General” tab, press “Reset” and choose “Erase Apple Watch Content and Setting” to start the reset process.

• Step 3. Following this, confirm your action by tapping “Erase All Content and Settings.” Continue to select the same option again as it appears on your Apple iPhone SE. If Find My is enabled for your Apple Watch, you will be prompted to enter your Apple ID and password. On adding the required details, select “Erase” to conclude the process.

Pro Tip. Make Apple Watch Unlocking Easy With Paired Phone

If you frequently forget the passcode to your Apple Watch, Apple has presented a dedicated option for maintaining control of this problem. It now provides a specific option of automatically unlocking the Apple Watch as soon as it comes near the paired iPhone. To enable this option, follow the simple steps provided as follows:

Instructions. Open the “My Watch” app on your Apple iPhone SE and scroll down to discover the “Passcode” option. Continue next and look for the “Unlock iPhone” option you need to enable.

Part 3. Working Methods To Unlock Apple Watch Without Passcode Perfectly

Apple Watch security features can manifest in various forms. Understanding these diverse forms of locks on your Apple Watch is essential. It allows you to employ specific operational methods to bypass these locks. Discussed below are three ways how to unlock the Apple Watch without passcode:

Way 1. Unlock Apple Watch Activation Lock Using Third-Party Service

When faced with an Activation Lock on your Apple Watch, accessing the watch might seem challenging. Activation Lock is commonly triggered when the Apple iPhone SE device is connected to an Apple ID and iCloud account.

Nevertheless, external services claim to provide solutions for bypassing the Activation Lock, specifically on Apple Watches. One such service is provided by Apple iPhone Unlock. These are the steps to bypass the Activation Lock on the Apple Watch:

• Step 1. Access the Apple iPhone Unlock website using a browser on another device. On the website, place the cursor on “Unlock iPhone” and choose “Apple Watch” from the drop-down menu.

• Step 2. Choose your “Country,” along with the network service provider. Next, enter the IMEI number of your Apple Watch and click “Unlock for any SIM Card.” Afterward, follow the prompts on the screen to complete the process.

Way 2. Unlock the Apple Watch Lock by Resetting

If you forget your Apple Watch passcode without a paired device, a method to unlock the watch remains available. In this scenario, performing a reset becomes the answer to the question of how to unlock Apple Watch without paired phone. Place your watch onto its charger and keep charging until this process is complete. Follow these steps to reset your Apple Watch and bypass the lock:

• Step 1. Press and hold the “Side” button until the Power menu appears. As it appears, press and hold the “Digital Crown” button of your Apple Watch.

• Step 2. Stop holding when the reset menu appears on the screen of the Apple Watch. Tap the “Reset” button on the bottom of the screen to execute the entire process.

Way 3. Unlocking Apple Watch Activation Lock by Contacting Previous Owner

Losing access to your Apple Watch goes beyond just forgetting the passcode; purchasing a used Apple Watch can also lead to being locked out. In this scenario, you can encounter an Activation Lock. Reaching out to the previous owner is a direct and often effective solution.

By contacting the previous owner, you can request them to remove the Apple iPhone SE device from their iCloud account. Here’s the procedure they can follow to unlock your Apple Watch, resulting in the Activation Lock bypass:

• Step 1. Access the iCloud website via a web browser and sign in using the Apple ID. Click on the grid icon near the top right corner and select “Find My.”

• Step 2. Once there, choose your Apple Watch from the “All Devices” list. Opt for “Erase This Device” from the Apple iPhone SE device’s pop-up menu. Finally, adhere to the on-screen instructions to finalize the process.

Bonus Tip. Unlock Your Locked iPhone With Wondershare Dr.Fone - Screen Unlock (iOS)

Like the Apple Watch, other Apple devices, such as iPhones, may also encounter locking issues. One such reliable and trusted tool to unlock various types of locks on iOS devices is Wondershare Dr.Fone . This tool is highly proficient and is designed to assist users worldwide in unlocking various iOS devices.

Dr.Fone offers a user-friendly interface coupled with powerful features. This makes it a go-to solution for resolving iPhone lock issues. That ensures versatility in resolving locking issues across a wide range of devices.

Prominent Features of Wondershare Dr.Fone

1. Fone eliminates the iCloud activation lock , requiring no password.
2. Should your Apple ID password slip your mind, Dr. Fone enables the removal of the ID from your device.
3. Additionally, it bypasses the encryption lock on iTunes backups while keeping the data inside intact.

Steps To Unlock Your Locked iPhone With Wondershare Dr.Fone

Dr.Fone, preferred by iOS users for its user-friendly interface and straightforward processes, has risen to the top. Unlocking your locked iPhone using Wondershare Dr.Fone involves the following steps:

• Step 1. Launching Dr.Fone and Initiating Device Unlock

Upon installing Wondershare Dr.Fone on your computer, launch the program. Access the “Toolbox” and navigate to “Screen Unlock”. Select “iOS” as the Apple iPhone SE device type and then choose “Unlock iOS Screen.” Click “Start” to commence the unlocking process for your iOS device.

• Step 2. Entering Recovery Mode and Firmware Preparation

Follow the on-screen instructions to put your iDevice into Recovery Mode. The platform will automatically detect and display the Apple iPhone SE device Model. Adjust the model or System Version if necessary, and once done, click “Start.” Track the iOS firmware download progress on the next screen.

• Step 3. Firmware Validation and Device Unlocking

Ensure the downloaded iOS firmware is validated. Click “Unlock Now” to initiate the unlocking process, enter the required code, and tap “Unlock” to proceed. Upon unlocking, click the “Done” button to complete the process.

Conclusion

In summary, this comprehensive guide navigated how do you unlock an Apple Watch. It addressed diverse scenarios, such as Activation Locks and forgotten passcodes . These strategies offer solutions for varied situations, from leveraging third-party services to collaborating with previous owners. Additionally, it recognizes the need for unlocking tools like Wondershare Dr.Fone.

Tips: Are you searching for a powerful iPhone Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

Also read: