How to Unlock Apple iPhone 12 Pro without Passcode or Face ID

You can’t access your Apple iPhone 12 Pro because the Face ID isn’t working, and you forgot your passcode? So you are considering how to unlock iPhone without face ID or passcode. If so, this article will walk you through how to do that.

Firstly, one ought to realize that it is impossible to hack an iPhone passcode. Therefore, the primary way that attempts to unlock your device without a PIN or Face ID is to erase it. After reading this guide, you will figure out how to unlock iPhone without passcode or face ID. Keep reading to find out more and learn about the best tools in the business.

Part 1: Best Ways to Unlock iPhone without a Passcode or Face ID

1. Unlock it via Find My

• Go to the iCloud official site, and sign in to your iCloud account. The site will give you two or three choices when you log in. Click on “Find iPhone” to proceed.
• You will be taken to another interface. Click “All devices” and select the Apple iPhone 12 Pro on which you need to erase the passcode.
• Click on “Erase iPhone”, and afterwards affirm the decision. That’s the simplest solution for how to unlock iPhone without passcode or face ID.

2. Via iTunes

Step 1. Go to Recovery Mode

Entering the recovery mode requires various steps, given your Apple iPhone 12 Pro model or settings. Assuming you’re uncertain which one you have, check the rear of your phone or the client manual you got in the first box.

iPhone 8 and Above:

• Hold the Side button used to lock your screen and both Volume buttons. The power-off slider will show up on the screen.
• Drag the slider to one side to switch off your Apple iPhone 12 Pro.
• Use a lightning connector to plug your Apple iPhone 12 Pro into a Macintosh or PC while holding the Side button.
• Keep holding the button until the recovery screen shows up.

iPhone 7/7 Plus:

• Hold the Side button used to lock your screen until the power-off slider shows up.
• Switch off your Apple iPhone 12 Pro.
• Connect your Apple iPhone 12 Pro to a Macintosh or PC through a connector while holding the Volume (-) button.
• Continue to press the button until you get to recovery mode.

iPhone 6 or Below:

• Hold the Side or Top button and trust that the power-off slider will appear.
• Switch off your Apple iPhone 12 Pro.
• Connect your Apple iPhone 12 Pro to a system through a connector while holding the Home button.
• Keep the Home button held until you see the recovery screen.

Step 2. Select your Device on your System

After entering recovery mode, you’ll have to continue on your Macintosh or PC. Then, contingent upon your OS, follow the aide underneath to begin unlocking your Apple iPhone 12 Pro.

macOS Catalina

• Go to the Finder window.
• Your Apple iPhone 12 Pro will appear on the left half of the Finder window under Locations. You can tap on it to choose it.

macOS Mojave or a Windows with iTunes

If your gadget isn’t running macOS Catalina or later, you’ll need to involve iTunes to connect your Apple iPhone 12 Pro. In the first place, download iTunes on your PC. Then, take the appropriate steps depending on which iTunes version you’re running:

• On iTunes 12 and newer, click on the Apple iPhone 12 Pro symbol in the upper-left corner of the iTunes window.
• On iTunes 11, click on the Apple iPhone 12 Pro tab on the right half of the iTunes window.
• On iTunes 10, the Apple iPhone 12 Pro will be in the sidebar on the left.

Step 3. Pick the Choice to Restore

When you’ve effectively connected and chosen your Apple iPhone 12 Pro on a Mac or a PC, tap on the Restore button. And that’s how to unlock iPhone without passcode or face ID.

3. DNS Server

The following steps explain how to unlock iPhone without face ID or passcode using a DNS server:

Step 1. Pick your LANGUAGE and COUNTRY from the lock screen menu after switching on a locked device.

Step 2. Click “Continue” to enter the WiFi settings page. Whenever requested to connect to WiFi, search for the “I” next to the WiFi tab.

Step 3. Disconnect your current network, go to “Network/connection Settings”, and click Forget.

Step 4. Click the “I” and enter a DNS server IP address to bypass the lock. IP addresses of different regions are given below:

• USA: 104.154.51.7
• South America: 35.199.88.219
• Europe: 104.155.28.90
• Asia: 104.155.220.58
• Australia and Oceania: 35.189.47.23
• Others: 78.100.17.60

Step 5. Then, click the “Back” choice at the left half of your screen, turn the WiFi on and select your network. Enter your WiFi passcode.

Click here

Step 6. Click Next Page > Back to enter the lock bypass screen. These are all the required steps for how to unlock iPhone without passcode or face ID 2022.

4. Dr.Fone-Screen Unlock

This section will introduce you to our most important solution. Yes, you heard it right. If you need a hassle-free method to unlock your iDevice without a passcode or face ID, use Wondershare Dr.Fone Screen Unlock.

Dr.Fone will not only remove the screen lock but also make sure to keep your identity safe. In addition, it is the easiest method and requires no prior knowledge. So if you are someone new to this technology, we suggest you follow the steps below:

Step 1. Launch the Software on your PC

After successfully installing Dr.Fone on your PC, open it and select the “Screen Unlock” tool from the main interface.

Next, connect your locked phone to the system through a wired connection. Then go for the iOS screen unlock feature.

Step 2. Recovery or DFU Mode Boot

It is necessary to first boot your locked device in recovery or DFU mode. Follow the guidelines on your screen to do so. The Recovery mode is the suggested way for iOS screen locks. If you can’t actuate this mode, go for the DFU mode boot.

Step 3. Select your Apple iPhone 12 Pro Model

After the phone is in recovery/DFU mode, the program will show the locked device’s information. Here you can see the model and iOS variant of the Apple iPhone 12 Pro device. If it isn’t correct, you could choose the right one from the dropdown menu next to it. After that, click the Download button to get the required firmware for your locked phone.

Step 4. Remove the Screen Lock

After downloading the firmware effectively, click the “Unlock Now” button to let Dr.Fone unlock your Apple iPhone 12 Pro.

Simply in no time, Dr.Fone will successfully unlock your device.

Note: This unlocking process will erase everything off your Apple iPhone 12 Pro and bring it to the factory default state. Indeed, no other method that doesn’t allow data erasure at the moment.

Part 2: How to Turn Off Passcode or Face ID on My Device?

Face ID can be a helpful method for unlocking your Apple iPhone 12 Pro - by simply looking at your phone. However, a few clients might worry that it’s not as secure as utilizing a PIN to open your phone. If that is the best case for you, you can follow this manual to disable Face ID and depend on a passcode.

Here’s the step-by-step guide to the most effective method to switch off Face ID on the iPhone:

1. Open the Settings application

First, tap on your Settings app to open it. That is the one on the home screen with a symbol like the mechanical gear.

2. Tap on Face ID and Passcode

On the Settings menu, tap on the Face ID and Passcode menu.

3. Enter your passcode

At this stage, you’ll be approached to enter your passcode, so do this to get to the Face ID and Passcode menu.

4. Switch off Face ID

You’ll have the option to turn off the switch for Face ID across different activities, including the phone unlock.

Part 3: Can I bypass my iPhone Face ID with a picture?

As indicated by Apple, the short and obvious answer is no.

FaceID isn’t simply a camera snapping a picture. It utilizes an exceptional chip to filter the face with many spots. It makes a 3D contour of the look that works in low, glorious light around evening time, and your eyes must be opened. The opportunity to randomly unlock an iPhone with FaceID is 1/1 million, compared to 1/50000 with Touch ID.

It doesn’t work by snapping a picture of your face, but by taking a contour of your face if you utilize a camera that can see infrared. However, a photograph is a level and cannot give a dab matrix required for Face ID to work. You may be holding a clear piece of paper before the phone.

The Bottom Line

That’s all about our take on how to unlock iPhone without passcode or face ID 2022. We have worked hard to make sure you get the right solutions in hand. However, we strongly suggest Dr.Fone if you still face issues with our solutions. Even if the above methods fail, Dr.Fone will ensure you unlock your phone.

How to Access Your Apple iPhone 12 Pro When You Forget the Passcode?

We all have secrets in our iPhone or some important financial or business data that we all wish to protect from unwanted access. For this, we set up a passcode. But what if Apple iPhone 12 Pro passcode is forgotten by you? Well, you may now wonder how to perform Apple iPhone 12 Pro passcode bypass, right? Worry no more! We’re right here to help you with the proven solutions for Apple iPhone 12 Pro passcode reset without iTunes or with it too. Let’s explore.

Part 1. Unlock Apple iPhone 12 Pro screen passcode in one click (unlock tool needed)

The first and the ultimate measure for Apple iPhone 12 Pro passcode removal in just a matter of a single click is Dr.Fone - Screen Unlock (iOS) . With the help of this mighty tool, performing Apple iPhone 12 Pro passcode reset is even easier than any other alternative. Not only it can perform Apple iPhone 12 Pro passcode bypass, you can also make use of this tool to bypass lock screen of an Android smartphone too. Isn’t it amazing? Moreover, this powerful tool works effortlessly with the latest iOS 13 version and even with the most recent iPhone models as well. Here is the step by step tutorial on Apple iPhone 12 Pro passcode bypass.

Step 1: Install and launch Dr.Fone - Screen Unlock (iOS)

Get the tool Dr.Fone - Screen Unlock (iOS) downloaded and installed over your computer system. Then establish a connection between your computer and iPhone.

Now, launch the tool and then opt for the “Unlock” tile from the main screen.

Step 2: Boot in Recovery/DFU mode

Next move that you need to perform is to opt for the correct mode, i.e. “Unlock iOS Screen”. Then, you’ll be prompted to boot your device in Recovery/DFU mode. The on-screen instructions will guide you on how to do it.

Step 3: Double-Check iPhone information

On the upcoming screen, you’ll be displayed the “Device Model” and most recent “System Version” which is compatible with your Apple iPhone 12 Pro. Simply, hit the “Start” button here.

Step 4: Perform Apple iPhone 12 Pro passcode removal

Once, the software downloads the firmware automatically, you can then proceed to Apple iPhone 12 Pro passcode reset. Hit the “Unlock Now” button over the next screen and in a short while you’ll be notified that Apple iPhone 12 Pro passcode removal is completed.

Click here

safe & secure

Part 2. Restore an iTunes backup for Apple iPhone 12 Pro

Here we’re going to be familiar with the Apple iPhone 12 Pro passcode reset using the renowned iOS data management tool, iTunes. But be sure that iTunes version installed over your computer is up to date or else unknown errors may crop up in between. Eventually, your all-new Apple iPhone 12 Pro may even get bricked. Think this is it? Well, here’s another problem with iTunes, you need to get your Apple iPhone 12 Pro connected only to a pre-synced or pre-trusted computer. Or else, this tutorial won’t bring any good to you.

Step 1: First, get your Apple iPhone 12 Pro connected to your PC. Then, launch the iTunes most recent version. It will automatically detect your Apple iPhone 12 Pro. Once detected, tap the “Device” icon over the left top corner of iTunes.

Step 2: Then, hit the “Summary” option from the left panel and then you need to hit the “Restore iPhone” button. Confirm your actions by simply pushing the “Restore” button on the pop-up message and you’re done. Now, just wait for the process to complete.

Part 3. Restore Apple iPhone 12 Pro in recovery mode to remove screen passcode

If somehow, the above solution fails and you’re just not able to get Apple iPhone 12 Pro passcode reset. You need to boot your device into recovery mode and then perform the factory reset. This would certainly wipe off everything from your Apple iPhone 12 Pro including the passcode as well. Here are the steps involved in booting your Apple iPhone 12 Pro in recovery mode.

• First things first, power off your Apple iPhone 12 Pro by pushing the “Side” button down along with either of the “Volume” button. Keep them pressed till you get to see “Power-off” slider over your screen. Now, simply drag it to power off your device.
• Next, connect your Apple iPhone 12 Pro and your computer firmly with the help of an authentic cable. Please make sure to press and hold the “Side” button meanwhile.
• Ensure not to let go the Side button till the recovery mode screen appears over your Apple iPhone 12 Pro.

• Once the Apple iPhone 12 Pro device is booted in recovery mode, iTunes will throw a pop up message that “iTunes has detected an iPhone in recovery mode”. Simply, hit the “OK” button over the message and then push the “Restore iPhone” button followed by confirming your actions.

Part 4. Use “Find iPhone” from iCloud

The next pro tutorial for Apple iPhone 12 Pro passcode removal is via iCloud. For this, grad access to any computer available on your side. Or, you can also make use of any other smartphone device but ensure it must be connected to a WiFi network or have an active data pack. Moreover, the locked iPhone on which you’re going to perform Apple iPhone 12 Pro passcode reset should also have an active internet connection to make this tutorial work.

Note: Since we’re going to unlock your Apple iPhone 12 Pro using Find My iPhone service of iCloud. It is important that “Find My iPhone” service was enabled beforehand over your Apple iPhone 12 Pro.

Step 1: Launch the browser over any other smartphone device or computer. Then, visit the official web page iCloud.com.

Step 2: Now, make use of same Apple account configured with your Apple iPhone 12 Pro to sign in to iCloud. Then, opt for the “Find My iPhone” icon over the launch pad.

Step 3: Next, tap on the “All Devices” drop-down menu available over the top midsection and then select the Apple iPhone 12 Pro that you wish to bypass the passcode off.

Step 4: Then, you’ll get to witness a pop-up window over your screen. Tap the “Erase iPhone” button over it and then confirm your actions. All the settings and data will be wiped off remotely from your Apple iPhone 12 Pro now.

Step 5: Lastly, wait for the process to complete and upon completion set up your device as usual.

Part 5. How about Apple iPhone 12 Pro restrictions passcode?

Apple iPhone 12 Pro restrictions is a vital setting that is used to lock down a set of functions of the iPhone. These iPhone restrictions are also known as Parental Controls. That implies one can make use of these settings to block or hide songs that have explicit lyrics/content or barring YouTube from running, etc.

It is vital to set up a 4 digit passcode if you want to use iPhone restriction settings. Now, if you somehow forgot the passcode that was set to make use of iPhone restrictions, you need to restore your Apple iPhone 12 Pro with the help of iTunes to remove the previous passcode. But ensure not to restore an old backup of iPhone or else, the old passcode which you may not know will also get activated. Eventually, making your situation even worse.

Reset/Change Apple iPhone 12 Pro restrictions passcode

Now, in case you know the Apple iPhone 12 Pro restrictions passcode and just wish to reset it. Then follow the streak of steps mentioned below.

1. Launch “Settings” of your Apple iPhone 12 Pro and then get into “General” followed by “Restrictions”. Now, you’ll be asked to key in the current passcode.

1. Once you’ve entered the current passcode, hit on the “Disable Restrictions” and to confirm your actions, key in your passcode when prompted.

1. Lastly, hit on “Enable Restrictions”. You’ll be asked to set up a new passcode now. Do it and you’re done.

How To Bypass the Required Apple Store Verification For Apple iPhone 12 Pro

The Apple App Store is a familiar place for anyone with an iPhone or iPad. It’s where you find all sorts of useful and fun apps. However, one thing that can be a hassle is the store’s strict verification process. Every time you make a purchase, you need to go through this step.

It’s there for a good reason – to stop fraud – but it can get annoying, especially if you forget your Apple ID or have other issues. This article will explore the ways to stop the Apple Store “Verification Required” prompt, making your app downloading experience smoother.

Part 1: Why Does Apple Require Verification in the Apple Store?

When browsing the App Store on your Apple iPhone 12 Pro or iPad and looking to download the latest game or productivity tool, you might have noticed that Apple often asks for some form of verification before you can proceed with your purchase. This is not just a random step; there’s a solid reason behind it.

The primary reason Apple requires verification for App Store purchases is to ensure that you are the person authorizing the purchase. This security measure prevents unauthorized transactions and protects your account from fraud.

What does this verification usually involve? It could be entering your Apple ID password or using Face ID or Touch ID if your device supports these features. These methods are designed to confirm your identity quickly and securely.

Reasons Why the Verification Required Message Might Appear

There are several reasons why you might see an Apple Store’ Verification Required’ message when trying to download an app or make a purchase:

• New Apple ID. If you’ve just created a new Apple ID and need to download or pay for apps, Apple must verify your payment information. Thus, you’ll have to prove everything, especially on a new phone.
• **Payment method needs to be corrected.**Suppose there’s an issue with your Apple ID’s payment method, such as outdated or incorrect details. In that case, verification is required to ensure the account is secure and ready for transactions.
• Invalid credit card. Unsupported or invalid credit cards can trigger the verification notice, as Apple can’t process payments with these cards.
• Unpaid balance. If there’s an outstanding balance on your Apple ID, you can download or pay for new apps once this balance is cleared.
• Family Sharing restrictions. For those using Family Sharing, if the family organizer has placed restrictions on your account, this could result in a verification prompt.

Understanding these reasons is the first step in addressing the ‘Verification Required’ message. It’s not just a random or annoying hurdle; it’s there for your security and to ensure a smooth, safe experience when using the App Store.

Part 2: How To Fix Verification Required Prompt Using Apple ID

Having to deal with the ‘Verification Required’ prompt in the App Store can be a bit of a hassle, especially when you’re eager to get your hands on a new app or game. Fortunately, there are several methods you can use to resolve this issue, most of which are pretty straightforward and can be done right from your device. Here’s how to tackle it:

Update Payment Method

One of the most common reasons for the verification prompt is a problem with your payment method. To fix this, go to your Apple ID settings on your Apple iPhone 12 Pro or iPad. Tap your name at the top of the Settings app, then go to Payment & Shipping. You can update your payment information or add a new payment method here. Make sure the details are correct and up to date.

Check Unpaid Subscriptions

Sometimes, unpaid subscriptions can trigger the verification prompt. Tap the App Store > your profile icon, and select Subscriptions. Here, you can view all your subscriptions, active or expired. Check if there are any unpaid ones and clear any outstanding payments.

Don’t Require Password for Purchases

For less frequent purchases, you should change the settings so you don’t always have to enter your password. Go to Settings, then to Screen Time. Under Content & Privacy Restrictions, select iTunes & App Store Purchases. Here, you can change the settings to Don’t Require for purchases. However, be cautious with this method as it reduces security.

Sign Out of Apple ID and Re-Sign In

Sometimes, simply signing out of your Apple ID and then signing back in can resolve the issue. Go to the Settings app, tap your name at the top, and scroll down to Sign Out. After signing out, restart your device and then sign back in. This can help refresh your account settings and clear up any minor glitches.

Remember, these methods are about bypassing the verification process and ensuring your account is up-to-date and secure. Regularly checking your Apple ID settings and payment information can prevent many common issues with the App Store, including the frustrating ‘Verification Required’ prompt.

Part 3: How To Bypass Verification Required Prompt Without Apple ID

If you need to learn how to bypass the ‘Verification Required’ prompt in the App Store but don’t have access to the Apple ID or password, there’s an alternative approach using third-party software. One such tool that can assist in this situation is Wondershare Dr.Fone - Screen Unlock (iOS), which offers a feature specifically designed for this purpose.

Introducing Dr. Fone’s Screen Unlock (iOS) Feature

Dr.Fone - Screen Unlock (iOS) function includes an Apple ID remover tool. This feature is handy when you cannot remember your Apple ID or password but need to download apps from the App Store. Here’s a step-by-step guide on how to use this feature.

Step-by-Step Guide To Bypass Verification Without Apple ID With Dr.Fone

Here’s a complete guide on bypassing the verification required on the App Store.

• Step 1: Install and open Wondershare Dr.Fone on your computer.

• Step 2: Navigate to Toolbox and select Screen Unlock followed by iOS.

• Step 3: In the next window, choose Remove Apple ID to proceed.

• Step 4: A connectivity status will appear on the screen with your iOS device connected to the computer. Click Unlock Now to start the process.

• Step 5: Confirm if your iOS device has a screen lock and two-factor authentication enabled. This is crucial for the process to continue smoothly.

• Step 6: Follow the on-screen instructions to put your iOS device in Recovery Mode. If necessary, you can also opt for DFU Mode by following the provided instructions. Once in Recovery Mode, the tool will recognize your device model. You’ll need to select the correct system version to proceed.

• Step 7: The tool will download the appropriate iOS firmware for your device. After the download, it will verify the firmware.

• Step 8: After firmware verification, click Unlock Now. You’ll be prompted to enter a code for confirmation. Once entered, the unlocking process will begin.

• Step 9: You’ll receive a notification once the process is complete. You may try again if the process fails to succeed the first time.

Note: After Apple ID removal, you must re-enter a new Apple ID to access the App Store. Take note of the password now if you forgot your previous one.

Conclusion

In this article, you’ve learned how to remove ‘Verification Required’ in the App Store. The primary takeaway is to try solving the issue using your Apple ID, as this approach typically prevents data loss. However, if you’re in a tight spot without access to your Apple ID, Dr.Fone - Screen Unlock (iOS) offers a reliable alternative to bypass this hurdle.

While it’s an effective solution, always consider it a secondary option to safeguard your data. Additionally, Dr.Fone can be a handy tool for various other phone-related challenges, making it a useful resource for tackling different tech problems.

Tips: Are you searching for a powerful Screen Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

Also read: