How to Unlock Apple iPhone 6 without Passcode or Face ID

You can’t access your Apple iPhone 6 because the Face ID isn’t working, and you forgot your passcode? So you are considering how to unlock iPhone without face ID or passcode. If so, this article will walk you through how to do that.

Firstly, one ought to realize that it is impossible to hack an iPhone passcode. Therefore, the primary way that attempts to unlock your device without a PIN or Face ID is to erase it. After reading this guide, you will figure out how to unlock iPhone without passcode or face ID. Keep reading to find out more and learn about the best tools in the business.

Part 1: Best Ways to Unlock iPhone without a Passcode or Face ID

1. Unlock it via Find My

• Go to the iCloud official site, and sign in to your iCloud account. The site will give you two or three choices when you log in. Click on “Find iPhone” to proceed.
• You will be taken to another interface. Click “All devices” and select the Apple iPhone 6 on which you need to erase the passcode.
• Click on “Erase iPhone”, and afterwards affirm the decision. That’s the simplest solution for how to unlock iPhone without passcode or face ID.

2. Via iTunes

Step 1. Go to Recovery Mode

Entering the recovery mode requires various steps, given your Apple iPhone 6 model or settings. Assuming you’re uncertain which one you have, check the rear of your phone or the client manual you got in the first box.

iPhone 8 and Above:

• Hold the Side button used to lock your screen and both Volume buttons. The power-off slider will show up on the screen.
• Drag the slider to one side to switch off your Apple iPhone 6.
• Use a lightning connector to plug your Apple iPhone 6 into a Macintosh or PC while holding the Side button.
• Keep holding the button until the recovery screen shows up.

iPhone 7/7 Plus:

• Hold the Side button used to lock your screen until the power-off slider shows up.
• Switch off your Apple iPhone 6.
• Connect your Apple iPhone 6 to a Macintosh or PC through a connector while holding the Volume (-) button.
• Continue to press the button until you get to recovery mode.

iPhone 6 or Below:

• Hold the Side or Top button and trust that the power-off slider will appear.
• Switch off your Apple iPhone 6.
• Connect your Apple iPhone 6 to a system through a connector while holding the Home button.
• Keep the Home button held until you see the recovery screen.

Step 2. Select your Device on your System

After entering recovery mode, you’ll have to continue on your Macintosh or PC. Then, contingent upon your OS, follow the aide underneath to begin unlocking your Apple iPhone 6.

macOS Catalina

• Go to the Finder window.
• Your Apple iPhone 6 will appear on the left half of the Finder window under Locations. You can tap on it to choose it.

macOS Mojave or a Windows with iTunes

If your gadget isn’t running macOS Catalina or later, you’ll need to involve iTunes to connect your Apple iPhone 6. In the first place, download iTunes on your PC. Then, take the appropriate steps depending on which iTunes version you’re running:

• On iTunes 12 and newer, click on the Apple iPhone 6 symbol in the upper-left corner of the iTunes window.
• On iTunes 11, click on the Apple iPhone 6 tab on the right half of the iTunes window.
• On iTunes 10, the Apple iPhone 6 will be in the sidebar on the left.

Step 3. Pick the Choice to Restore

When you’ve effectively connected and chosen your Apple iPhone 6 on a Mac or a PC, tap on the Restore button. And that’s how to unlock iPhone without passcode or face ID.

3. DNS Server

The following steps explain how to unlock iPhone without face ID or passcode using a DNS server:

Step 1. Pick your LANGUAGE and COUNTRY from the lock screen menu after switching on a locked device.

Step 2. Click “Continue” to enter the WiFi settings page. Whenever requested to connect to WiFi, search for the “I” next to the WiFi tab.

Step 3. Disconnect your current network, go to “Network/connection Settings”, and click Forget.

Step 4. Click the “I” and enter a DNS server IP address to bypass the lock. IP addresses of different regions are given below:

• USA: 104.154.51.7
• South America: 35.199.88.219
• Europe: 104.155.28.90
• Asia: 104.155.220.58
• Australia and Oceania: 35.189.47.23
• Others: 78.100.17.60

Step 5. Then, click the “Back” choice at the left half of your screen, turn the WiFi on and select your network. Enter your WiFi passcode.

Step 6. Click Next Page > Back to enter the lock bypass screen. These are all the required steps for how to unlock iPhone without passcode or face ID 2022.

4. Dr.Fone-Screen Unlock

This section will introduce you to our most important solution. Yes, you heard it right. If you need a hassle-free method to unlock your iDevice without a passcode or face ID, use Wondershare Dr.Fone Screen Unlock.

Dr.Fone will not only remove the screen lock but also make sure to keep your identity safe. In addition, it is the easiest method and requires no prior knowledge. So if you are someone new to this technology, we suggest you follow the steps below:

Step 1. Launch the Software on your PC

After successfully installing Dr.Fone on your PC, open it and select the “Screen Unlock” tool from the main interface.

Next, connect your locked phone to the system through a wired connection. Then go for the iOS screen unlock feature.

Step 2. Recovery or DFU Mode Boot

It is necessary to first boot your locked device in recovery or DFU mode. Follow the guidelines on your screen to do so. The Recovery mode is the suggested way for iOS screen locks. If you can’t actuate this mode, go for the DFU mode boot.

Step 3. Select your Apple iPhone 6 Model

After the phone is in recovery/DFU mode, the program will show the locked device’s information. Here you can see the model and iOS variant of the Apple iPhone 6 device. If it isn’t correct, you could choose the right one from the dropdown menu next to it. After that, click the Download button to get the required firmware for your locked phone.

Step 4. Remove the Screen Lock

After downloading the firmware effectively, click the “Unlock Now” button to let Dr.Fone unlock your Apple iPhone 6.

Simply in no time, Dr.Fone will successfully unlock your device.

Note: This unlocking process will erase everything off your Apple iPhone 6 and bring it to the factory default state. Indeed, no other method that doesn’t allow data erasure at the moment.

Part 2: How to Turn Off Passcode or Face ID on My Device?

Face ID can be a helpful method for unlocking your Apple iPhone 6 - by simply looking at your phone. However, a few clients might worry that it’s not as secure as utilizing a PIN to open your phone. If that is the best case for you, you can follow this manual to disable Face ID and depend on a passcode.

Here’s the step-by-step guide to the most effective method to switch off Face ID on the iPhone:

1. Open the Settings application

First, tap on your Settings app to open it. That is the one on the home screen with a symbol like the mechanical gear.

2. Tap on Face ID and Passcode

On the Settings menu, tap on the Face ID and Passcode menu.

3. Enter your passcode

At this stage, you’ll be approached to enter your passcode, so do this to get to the Face ID and Passcode menu.

4. Switch off Face ID

You’ll have the option to turn off the switch for Face ID across different activities, including the phone unlock.

Part 3: Can I bypass my iPhone Face ID with a picture?

As indicated by Apple, the short and obvious answer is no.

FaceID isn’t simply a camera snapping a picture. It utilizes an exceptional chip to filter the face with many spots. It makes a 3D contour of the look that works in low, glorious light around evening time, and your eyes must be opened. The opportunity to randomly unlock an iPhone with FaceID is 1/1 million, compared to 1/50000 with Touch ID.

It doesn’t work by snapping a picture of your face, but by taking a contour of your face if you utilize a camera that can see infrared. However, a photograph is a level and cannot give a dab matrix required for Face ID to work. You may be holding a clear piece of paper before the phone.

The Bottom Line

That’s all about our take on how to unlock iPhone without passcode or face ID 2022. We have worked hard to make sure you get the right solutions in hand. However, we strongly suggest Dr.Fone if you still face issues with our solutions. Even if the above methods fail, Dr.Fone will ensure you unlock your phone.

How To Fix Apple iPhone 6 Unavailable Issue With Ease

The Apple iPhone 6 stands out as an impressive device that integrates technology and practicality. Nonetheless, even the most cutting-edge devices experience occasional setbacks. Among these, one major problem for iPhone users is the “iPhone Unavailable” message. This problem typically arises when many incorrect passcode attempts have locked the Apple iPhone 6 device. It renders the Apple iPhone 6 device inaccessible, displaying the “iPhone Unavailable” prompt.

Yet, worry not, for reliable methods exist to address this problem efficiently. In this guide, we’ll explore the best and proven techniques for how to fix iPhone unavailable. We will also walk you through step-by-step solutions and provide clear instructions to resolve your unavailable iPhone.

Part 1. iPhone is Unavailable: Explaining the Basics

The “iPhone Unavailable” issue is a distressing fix encountered by users. It occurs when their iPhone becomes unavailable with a black screen and inaccessible due to many incorrect passcode attempts. This problem arises as a security measure implemented by Apple. Its primary aim is to protect the data on the Apple iPhone 6 device and deter unauthorized access.

The iPhone’s security mechanism typically activates after six wrong attempts. It starts with making the Apple iPhone 6 unavailable for a specific period. The device becomes permanently locked when the incorrect code is entered consecutively for the 10th time. This lock manifests as the “iPhone Unavailable” message on the screen.

This acts as a shield against potential intruders trying to gain access by guessing or brute-forcing the passcode. However, this protective measure can affect users who forget their passcodes or insert incorrect entries mistakenly. For example, there are cases of children playing with the Apple iPhone 6 device, leading to accidental key presses. All of this makes learning how to unlock the Apple iPhone 6 unavailable an essential thing to learn.

Part 2. [Top Fix] Unlock iPhone Unavailable Without Lossing Data By Wondershare Dr.Fone

When faced with the “iPhone Unavailable” issue, the most common cause is forgetfulness. The other major cause is the accidental incorrect entries of the Apple iPhone 6 device’s passcode. This predicament leaves users locked out of their iPhones and functionalities. Wondershare Dr.Fone emerges as a leading solution to tackle this frustrating problem.

It is designed to address various iOS-related issues, including unlocking disabled iPhones. Dr.Fone offers a user-friendly approach to regaining access to your device. The tool offers a smooth process that bypasses the locked screen, allowing users to regain entry into their iPhones. It can remove all screen locks like passcode, password, Touch ID, and Face ID.

Key Highlights of Wondershare Dr.Fone

1. You can remove the iCloud activation lock swiftly and effortlessly with Dr.Fone’s iPhone unlocking function.
2. It effectively bypasses the Apple ID lock permanently, irrespective of the activation of Find My/Find My iPhone on the Apple iPhone 6 device.
3. Fone empowers you to bypass MDM restrictions from your device without data loss or the necessity to jailbreak your device.

Steps To Unlock Your Apple iPhone 6 Unavailable With Wondershare Dr.Fone

With Dr.Fone, even users with no tech prowess can easily unlock their devices. Below is the guide to iPhone unavailable how to fix using Wondershare Dr.Fone - Screen Unlock (iOS):

Here is a video for you to learn how to unlock your Apple iPhone 6 screen:

• Step 1. Dr.Fone Installation and iOS Screen Unlock Setup

After installing Wondershare Dr.Fone onto your computer, launch it. Proceed by accessing “Toolbox,” followed by “Screen Unlock.” Now choose “iOS” as the Apple iPhone 6 device type and choose the “Unlock iOS Screen” option. Click “Start” on the next screen to start the unlocking process for your iOS device.

• Step 2. iDevice Recovery Mode and Firmware Download

Afterward, place your iDevice into Recovery Mode by following the on-screen instructions. Then, the platform will detect the “Device Model” and showcase it. If necessary, change the model and choose the “System Version.” Once these adjustments are made, click on “Start “to continue. The next screen will display the download progress of the iOS firmware.

• Step 3. iOS Firmware Verification and Unlocking Confirmation

After ensuring the iOS firmware is downloaded and validated, you’re ready to proceed. To begin unlocking, click the “Unlock Now” button. This action will trigger a confirmation prompt asking you to enter the necessary code. Once entered, tap “Unlock” to advance to the last stage. Click the “Done” button to complete the process when your device is unlocked.

Tips: Are you searching for a powerful iPhone Unlock tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

Part 3. How To Unlock iPhone Unavailable Using Find My

When encountering the Apple iPhone 6 Unavailable issue, a method to regain access is Apple’s Find My feature. This method allows users to erase their device remotely and set it up again. Nevertheless, it’s important to emphasize that this procedure will delete all information on the Apple iPhone 6 device while unlocking it. Below is a detailed, step-by-step guide on unlocking your Apple iPhone 6 Unavailable using Find My:

• Step 1. Using a web browser, access the iCloud website and “Sign In” using your Apple ID and password. Once logged in, scroll down and click the “Find My” option on the website.

• Step 2. On the following screen, select the unavailable iPhone from the “All Devices” section on the left side. Once you access the Apple iPhone 6 device options, tap the “Erase this Device” option. Afterward, follow the on-screen prompts to erase the Apple iPhone 6 device completely.

Part 4. How To Unlock iPhone Unavailable Using Erase iPhone Feature

One potential solution to resolve the Apple iPhone 6 Unavailable issue is the “Erase iPhone” feature. It is available for users running iOS 15.2 or higher via the Apple iPhone 6 device itself. This method is straightforward but requires you to have your device’s Apple ID password. Using this method will result in all data deletion on your Apple iPhone 6. The following is how to unlock unavailable iPhone using Erase iPhone:

• Step 1. To begin, look for the “Erase iPhone” option in the bottom right corner of your Apple iPhone 6.

• Step 2. A prompt will appear on the screen, warning you about the data loss or trying again in 15 minutes. Here, tap “ Erase iPhone” again, and on the following screen, enter the Apple ID “Password.” This will kickstart the process of erasing your Apple iPhone 6, and it will become available.

Part 5. How To Unlock iPhone Unavailable Using Other Device

If another device uses the same Apple ID as your locked device, you can use it to unlock it. You can remotely erase the locked device using the Find My app on this trusted device. It’s important to note that this action necessitates your Apple ID credentials.

Moreover, it will result in deleting all data on the locked device. These are the steps to remove the “Unavailable” iPhone from another device:

• Step 1. Access the Find My app on your reliable iOS device and log in with your Apple ID details. Within the Find My interface, expand the “Devices” tab from the bottom side of the screen.

• Step 2. Within “Devices,” locate and select the “Unavailable” iPhone from the list of devices. Once you have selected the Apple iPhone 6 device, choose “Erase This Device” from the available options after scrolling down.

• Step 3. Afterward, press the “Continue” button to confirm your choice. On the following screen, “Enter Phone Number” if needed and tap the “Erase” option at the top right corner. Next, write your “Apple ID password for verification purposes and again hit the “Erase” option to erase the Apple iPhone 6 device quickly.

Part 6. How To Unlock iPhone Unavailable Using iTunes

Consider utilizing iTunes as a solution for the “iPhone Unavailable” issue. It involves the restoration of your device to its factory settings. While effective, note that it leads to complete data loss. Unlocking your Apple iPhone 6 Unavailable via iTunes is detailed in the following step-by-step guide:

• Step 1. Make certain your computer has the most recent version of iTunes installed. Afterward, connect your Apple iPhone 6 to it via a USB cable. To place your device into Recovery Mode, refer to the appropriate guide based on your Apple iPhone 6 model.
• **For iPhone 8 or Later:**Press the Volume Up button momentarily, followed by the Volume Down button similarly. Press the Side button until the recovery mode screen is displayed.
• For iPhone 7 and 7 Plus: Simultaneously press the Volume Down and Sleep/Wake buttons and hold them until the recovery mode screen comes up.
• **For iPhone 6s and Earlier:**Simultaneously press the Home and Sleep/Wake buttons until the recovery mode screen emerges.

• Step 2. In iTunes, a notification will appear, signaling a problem with the Apple iPhone 6 that needs to be updated or restored. Select the “Restore” option to commence the restoration procedure. This action will delete all data and configurations on the Apple iPhone 6 and install the most recent iOS version.

Conclusion

In conclusion, several helpful methods exist for how to unlock unavailable iPhone. Various techniques offer solutions, including iTunes, Find My, and other device removal methods. Dr.Fone distinguishes itself as the most effective choice. This is due to its user-friendly interface and capability to bypass the lock, making it the optimal solution.

How to Unlock Apple iPhone 6 With an Apple Watch & What to Do if It Doesn’t Work

There are plenty of reasons why Apple devices are in such high demand. The quality of the products is unquestionable – few can argue the superior quality of the Apple iPhone 6’s camera, for instance. Almost all devices are long-lasting. They have a great resale value. They offer cutting-edge features.

However, perhaps the greatest advantage of Apple products is just how well they integrate with one another and work together.

With a quick little tap, you can have your Apple iPhone 6’s camera working as your Mac’s webcam. You can use your iPad as a second Mac display. Take calls using any device.

Moreover, you might be able to use the Apple Watch to unlock your Apple iPhone 6.

Now, you cannot just unlock any Apple iPhone 6 with your Watch. The devices must be paired, and you’ll need to follow a few steps to enable this option. Here’s how to unlock your phone using your Apple Watch like a pro.

Part 1. Can I Use an Apple Watch To Unlock My Apple iPhone 6?

The Apple iPhone 6 face ID is one of the simplest, most practical ways to unlock your phone. While you’ll need a passcode just as another security layer, you won’t have to worry about someone else breaking in if they know it, going through your messages, or collecting your private information.

With face ID, only you can unlock your phone, sign in to your favorite apps, and even authenticate purchases.

The problem is that neither face ID nor traditional passcodes aren’t always the most convenient option. If you wear sunglasses, safety goggles, a face mask, or other face coverings and can’t take them off for some reason, face ID won’t work. If you have gloves on and can’t type in your passcode, your passcodes won’t work.

What could work is your Apple Watch.

Depending on the Apple Watch version you own and your Apple iPhone 6 model, you could use your watch to unlock your phone in any circumstances. It’s easy, secure, and convenient, above all else.

Part 2. Requirements for Unlocking Apple iPhone 6 With Apple Watch

Unfortunately, not every Apple iPhone 6 can be unlocked with your Apple Watch, and not every Apple Watch can unlock your Apple iPhone 6. Both devices must meet some requirements before you can adjust your settings to enable this option.

To be able to use your Apple Watch to unlock your phone with the utmost ease, you’ll need:

• An Apple iPhone 6 with Face ID – Apple iPhone 6 X and newer models;
• iOS 14.5 and newer versions;
• An Apple Watch series 3 and newer models;
• watchOS 7.4 and newer versions.

Additional requirements you’ll need to meet include:

• Your Apple iPhone 6 and Apple Watch need to be paired;
• Both devices need to have WiFi and Bluetooth turned on (but a connection to a WiFi network isn’t necessary);
• You need to have a passcode on your Apple Watch;
• Wrist detection on your watch needs to be turned on;
• The watch needs to be on your wrist and unlocked.

You’ll also need to wear items such as sunglasses, face coverings, ski masks, or others that prevent you from using your Apple iPhone 6 Face ID.

Part 3. How To Unlock Apple iPhone 6 With an Apple Watch

If you meet all the aforementioned criteria, setting up the feature to unlock your Apple iPhone 6 using an Apple Watch is easy. You’ll just have to follow a few steps:

• Step 1: Go to Settings > Face ID & Passcodeon your Apple iPhone 6;

• Step 2: Type in your passcode;
• Step 3: Find and enable Unlock with Apple Watch.

Remember that your Apple Watch’s wrist detection must be turned on for this option to work. When you tap to enable Unlock with Apple Watch, if your wrist detection isn’t turned on, you’ll get a prompt on your phone asking you to turn it on.

You can turn on wrist detection on your watch by following these steps:

• Step 4: Go to Settingson your Apple Watch;
• Step 5: Tap on the Passcode;
• Step 6: Toggle Wrist Detection

Now that you’ve enabled the option to unlock your Apple iPhone 6 using your Apple Watch, it’s time to simply start using the feature. To unlock your phone, you’ll need to:

• Have your Apple Watch on your wrist, unlocked;
• Tap on your Apple iPhone 6 or raise it to your face to activate it;
• Glance at your phone while wearing a face mask, sunglasses, or another item that’s preventing you from using Face ID;
• Swipe up on your phone’s screen.

Your Apple Watch will send an alert when you’ve used it to unlock your Apple iPhone 6. If you accidentally unlock your phone, simply tap on the Lock Apple iPhone 6 on the screen of your watch to lock it.

However, remember that the next time you want to use your Apple Watch to unlock your Apple iPhone 6, you’ll first need to type in your passcode.

Part 4. What To Do if You Can’t Unlock Your Apple iPhone 6 With a Watch

Generally speaking, unlocking your Apple iPhone 6 with an Apple Watch should be a simple, seamless task. Unfortunately, though, that’s not always the case. A glitch or a bug could be preventing you from enjoying this feature, so take a look at a few things you could try to fix it.

1. Check All Settings & Reconfigure

As mentioned earlier, there are a few requirements that your devices need to meet to unlock your Apple iPhone 6 with your Apple Watch.

If you’re using the correct versions of Apple iPhone 6 (iPhone X, iOS 14.5 and newer) and Apple Watch (series 3, watchOS 7.4 and newer), try to reconfigure your settings.

Make sure that you have:

• A passcode on your watch;
• Wrist detection turned on;
• Feature Unlock with Apple Watchturned on on your Apple iPhone 6.

If all the settings are correct, try one of the following options.

2. Restart Your WiFi/Bluetooth Connection

Your Apple iPhone 6 and your Apple Watch need to have both WiFi and Bluetooth turned on. If they’re turned on on both devices, try turning them off and back on again to restart the connection.

Remember, you only need WiFi and Bluetooth on but don’t need to be connected to a WiFi network.

If the problem persists, you could also restart your devices and try again.

3. Reset Your Face ID

In some instances, it’s the Face ID feature that’s causing trouble, so you might want to try and reset it. It’s much easier than it may sound, you just need to follow the next few steps:

• Step 1: Go to your Apple iPhone 6’s Settings;
• Step 2: Select Face ID & Passcode;
• Step 3: Tap Reset Face ID.

When you tap on this, you’ll need to go through the process of setting your Face ID as usual. You’ll need to type in your passcode, hold your Apple iPhone 6 in front of you (in portrait orientation), tap to get started, and put your face in the provided frame.

Move your face to complete the circle, then tap on Continue. Repeat the face scan process the second time and select Done.

4. Do a System Repair on Your Apple iPhone 6

If your Apple Watch unlock is still misbehaving, you might need to do a full system repair. As a general rule of thumb, it’s best to use verified apps like Dr.Fone to prevent the problem from getting worse.

Dr.Fone Apple iPhone 6 system repair is designed to be fast, efficient, and safe. It can repair virtually any system glitch in less than five minutes, ensuring your phone operates seamlessly.

To perform a standard system repair with Dr.Fone, follow the next few steps:

• Step 1: Download and launch Dr.Fone on your computer;
• Step 2: From the Toolboxon your left-hand side, select System Repair;

• Step 3: Connect your Apple iPhone 6 to your PC using a cable connection;
• Step 4: Select your device type in the new window that opens;
• Step 5: Select iOS repair;

• Step 6: Select Standard Repair Mode;
• Step 7: Follow the on-screen instructions and select Enter Recovery Mode;
• (Alternatively, select Guideif your phone is unresponsive);
• Step 8: Select the iOS firmware you want to download and install on your device;
• Step 9: Wait for the download to finish, then select Repair Now;
• Step 10: Wait until the process is complete, then select Done.

If it was a system mistake preventing you from unlocking your Apple iPhone 6 with your Apple Watch, the option should be functioning well after the Dr.Fone iOS repair.

5. Reset Network Settings

If the problem wasn’t due to a system glitch, you should try resetting your Apple iPhone 6’s network settings. The process is simple, just:

• Step 1: Go to Settings > General > Reset > Reset Network;
• Step 2: Type in your passcode.

Resetting your network settings will clear out data from your internet, local network, and devices, including WiFi passwords, some Bluetooth connections, and more. However, your paired devices, such as the Apple Watch, shouldn’t be removed.

6. Reset Your Watch and Pair It Again

Finally, if you’re still experiencing issues, you might need to reset your Apple Watch and pair it with your Apple iPhone 6 again.

It’s all quite simple:

• Step 1: Press and hold the power button;
• Step 2: Drag the slider under Power offto the right;
• Step 3: Press and hold the power button to turn the Apple iPhone 6 device back on.

To perform a hard reset, simultaneously press and hold the power button and digital crown.

Conclusion

Using your Apple Watch to unlock your Apple iPhone 6 is convenient when you cannot use the Face ID feature. It allows you to seamlessly unlock your phone when wearing sunglasses, goggles, face masks, or other face coverings that prevent the Face ID from working.

Enabling this option is a straightforward process, and if there’s ever a glitch, there are several options you could try to repair it.